Tutorial icon Tutorial — Tutorial slide plugin for ARC: create, format and embed text and images per .ezb project; navigate/update slides via ControlCommand; auto-resize images Try it →
Asked — Edited
Resolved Resolved by jstarne1!
1 Participant

Dj Sures Omnibot 2000

Hoping someone can help me with this.I'm currently assembling parts to build my own and had some questions.

  1. in the showcase it calls for a motor controller. Do I need 1 or 2 of these? I've read different thoughts on the subject. I plan to use Omnibots original drive train system for now.

  2. What kind of motor controller? Looking around it seems a lot of people use the L289n h bridge. Would this work for me?


ARC Pro

Upgrade to ARC Pro

Unleash your creativity with the power of easy robot programming using Synthiam ARC Pro

#1  

To use the original motors and gearbox a l298n h bridge works. That's what it uses. If your going to add more than 5 or 10 pounds to the robot you may want to consider a sabertooth 2x10 or 2x12 and up the voltage from the original 6 volts to a 12 volt battery. A single 12 volt fits very well in the bottom drawer and ezb can fit where the original 6 volt battery went.

#2  

Awesome , I plan to leave him mostly stock so it sounds like the L289n will work perfect. I just need 1 then?

#4  

Also, I was looking around and saw PWM mentioned. Do I need a H bridge with or without PWM?

#5  

With pwm so you can adjust speed.

#6  

Awesome, thank you so much jstarne1!