Parts Like Servo City

Question

I was wondering if anyone knew of a European / UK seller of servo mechanical attachments similar to ServoCity's stock.

https://www.servocity.com/html/channel___brackets.html https://www.servocity.com/html/bearing_mounts.html

and

https://www.servocity.com/html/standard_hitec_servoblocks.html

:D

They are quite reasonably priced but shipping to UK is 50+. If I only spent a 5 on something, it doesn't make it worth while

Rich · Answer

Proto Pic Robot Electronics Active Robots Those are the main ones I use along with ebay.

Jaychadw · Answer

I have looked at Protopic but I didn't see anything like these. That being said, I have missed things MANY times. I have a nasty habit of flicking through things a little too quicky. sometimes. quite often. All right ALL the time. Out of interest, what are your favourite parts to use for rigging servos to mechanical setups?

Rich · Answer

You may not have missed them, I haven't actually ordered anything like you are after but assumed they could be on those sites. All I've been using are the lynx motion brackets. Tony (@ToyMaker) will probably know exactly where to get them though.

Jaychadw · Answer

ok thanks. I have just been looking a little more closely and have come across a few similar parts. I'll keep a look out for Tony and ask him as well.

Actobotics · Answer

Hi Jaychadw - You can purchase the parts you mentioned (aluminum channel, bearing mounts, etc) from RobotShop.com's European site. They carry almost our entire line of ActoboticsT components and they have reasonably priced shipping to your location. Hope this helps! (https://www.robotshop.com/search/search.aspx?locale=en_eu&keywords=actobotics) Thanks, Lauren ServoCity / Actobotics

Jaychadw · Answer

@Actobotics Thank you so much for that. To be honest I am vry surprised to get a response from you HERE. I contacted the team at servo city but never get a response

Actobotics · Answer

Happy to help! We are usually very good about answering direct e-mails, I am sorry about the experience you had. Glad I found your post here. Let us know if there is anything else we can do for you. Thanks!

Jaychadw · Answer

@actobotics I did have a lot I wanted to talk to someone about from your company. Would you be available to chat about things via direct email?

Actobotics · Answer

We'd be happy to...if you e-mail tech@servocity.com you should receive a reply. I'll let them know to expect your e-mail. Thanks, Lauren ServoCity / Actobotics

Jaychadw · Answer

thank you very much

Toymaker · Answer

As Rich said, I use a lot of pre made brackets and hubs for my prototyping work, see my AIMEC thread and the new arm to see some servo bracket configurations. In the UK, Active Robots are a reliable supplier and have a really good range of servo accessories.

Jaychadw · Answer

@Toymaker Do you have a link to this thread please?

Rich · Answer

https://synthiam.com/Community/Questions/3288

Jaychadw

Upgrade to ARC Pro