All Community Content
Experience the transformation – subscribe to Synthiam ARC Pro and watch your robot evolve into a marvel of innovation and intelligence.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Wheel Encoder Counte…
Arduino UNO wheel encoder: reads left/right ticks, provides counts, configurable ticks, wheel & pivot sizes,...
Featured
Balancing controller for Sainsmart v3 (and compatible) robots: PID tuning, real‑time telemetry, angle offset, movement and calibration via ARC.
Featured
Omnibot 2000 project ready for EZ-B v4: worm-drive motors, Bluetooth AM/FM audio, DVD media player, 4" LCD, RC and EZ-B control.
question
How About A Walk-Off Competition
Hey Brothas and sister, I would love to see and learn the best method used with the EZ-B for biped motion. Measure could be speed and stability. Here's an...
7
3 k
Nomad 6R |
question
New Script Command Request
@DJ and team. I give a small request that I hope you would consider adding to EZ-Script. Would it be possible to add a new script command for servostop()? I'm not...
23
6 k
VGosine |
question
Rgb Animator Help
Hi guys. I have a quick question regarding the RGB animator config "Settings" menu. At the moment I have 4 animator actions and would like to know if I can asign a soundboard...
23
5 k
Steve G |
question
Ez-Cloud History
I like the " Version History " in the EZ-Cloud, it is very usefull. The question is, would that option be coming the local pc file system soon or at all ? Thanks,
3
2 k
andre |
question
Ez Robot Abilities
I was just wondering if anybody has posted any videos of an ez-robot completing tasks other than just dancing or other very simple things. People have been receiving them for a short while now so I just thought what I saw would be impressive by now. Not trying to be negative just trying to understand all the hype about it before I get mine cuz I...
26
5 k
Steve G |
question
Digital Servos?
In another thread, DJ said that to prevent the "jump" on power-up of servos, we could use digital servos, and that in the new year EZ-Robots would be offering a line of digital servos with full motion range (apparently a limit on those available today). I have a couple of questions about these. I know digital servos can provide position...
4
3 k
thetechguru |
question
Led Matrix Panel
For a new project I'd like to add an LED Matrix Panel to my robot. I've see a few things in the manual about attaching individual LEDs (https://synthiam.com/tutorials/Hardware.aspx?id=7). However, what I am really looking for is something more like this - https://learn.adafruit.com/32x16-32x32-rgb-led-matrix. This one is compatible with the Arduino...
1
2 k
silverled.net |
question
Roli H-Bridge Wired Backwards
After following the connection tutorial, my Roli was going backwards but turning in the right direction. After some tinkering and using the direction/correction charts in Rich's excellent l298n tutorial I determined that the wiring harness was connected backwards. Reversed the connection on all the wires except the powerband ground. So, to save...
8
3 k
thetechguru |
question
Robot Head
Does anyone have recommendations for printing the robot head? We have an Ultimaker 2 and have tried repeatedly with no success. We recently also received a Makerbot Ultimaker 2x. We are going to try printing this morning. I assume supports are a must. Other recommendations?
0
2 k
gwelker |
question
Limiting Servo Speed After Network Connection
I have an annoying little problem I hope someone can help me with. So, when I power up my EZ-B4 the servos connected to it briefly pulse. Not a problem and expected. All my connected servos have limited speeds and set min/max movement positions. But, after the V4 and my PC connect and I move a servo, any servo, with my controller for the first...
9
3 k
Steve G |
question
Making An Action Using Sdk:C#
Hello, i would like to know how do i create simple action using sdk c#. So far, i only manage to create frames using sdk, but i can't add those frames together to create an action like its possible in ARC . Thankyou in adv
2
2 k
ezrobot3 |
question
Rotating Servo Calibration-Unscripted
Hey guys. Made this tutorial for people who had difficulty understanding the Ez-Robot tutorials, All unscripted.(This will be my new vid tutorial...
2
3 k
CardboardHacke… |