All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Broadcast live audio and video from ARC camera to the web via HLS; cross-browser streaming. Requires router configuration for external access.
Featured
Agricultural robot using EZ-Bv4 controller-migrate from Raspberry Pi to x64 Windows for on-board machine vision and USB-serial communication
question
Looking For Omnibot 2000 Part
I am looking for a part for my Omnibot 2000.It is one of the carry handles just below its head. There are two of them.I have the right one looking from front.My...
7
4 k
Das_B |
question
Saying A Variable From The Variable Watcher
Ok I am running one of those other boards and sending a variable to EZB and into the variable watcher. This is a room temperature reading. The variable name is $Temp. I want to have EZB tell me the variable value at the time I ask for it. (Example: It is 74 degrees in the room at the time of the reading.) I have tried ... SayWait("The...
4
3 k
DJ Sures |
question
Learning Robot
could this be a good learning robot ? for in the shop. ezbv4x1 hexabodyx1 cubex3 pegx3 charger you can also use a gear from broken servo as in the pic.
1
3 k
Nomad 6R |
robot
Conway's Why Not Take The Spider Robot
Combine a spider robot chassis with a humanoid upper body and printed robotic hands for legged mobility and precise small-object gripping.
0
2 k
conway.nichola… |
question
Ezbv Not Connecting
my appolegies to ask this again.i need an answer how to figur out, if the ezbv is damaged.i bouth a new one,and set it on Engenius. withs is just recently all set up by a pc...
39
7 k
Nomad 6R |
question
Robot Ideas
Prior to my purchase of JD (who should be arriving tomorrow, whoot!) I submitted a robot idea, and received a nice little discount coupon which I applied to the purchase. Thanks for that! Whilst awaiting JD's arrival, I've thought of another couple of experiments I'd like to try, and as the banner to submit ideas still comes up when I go to the...
2
2 k
Aceboss |
question
Changing The Name Of The Ez Network
Hi Guys. Atm I have 9 EZ robots for teaching programming to kids. When they all get turned on more or less at once, there is 9 Networks pretty similar...
10
4 k
DJ Sures |
release
Windows Release 2016.05.06.00
Configure camera object tracking with custom object selection, per-object variables, RGB 8x8 display fixes, and updated EZ-SDK support.
3
4 k
DJ Sures |
robot
Donesvarc's Wall-E From Czech Republic
Build a custom WallE robot with parts list, servo mods, wiring tips, cameras, sensors, LEDs, audio and power solutions for realistic motion
39
20 k
donesvarc |
question
Bookstone Rover 2.0
Hello, I am very new to anything robotics and need some help/advice on what to do with my Brookstone Rover 2.0. After searching the Internet for any upgrades to the software or firmware I came across an EZ-robot video where some guy explains that a Brookstone Rover can be controlled by using the arrow keys of my PC / a joystick / etc. using the ARC...
14
7 k
thetechguru |
question
Speed Battlebot
here an idea for battlebot.
0
3 k
Nomad 6R |
question
Jd C3po
I created a couple of C3PO themed parts for JD. A modified front face and a chest plate that can be clipped on the front of JD. Thingiverse JD C3PO Head Thingiverse JD C3PO Chest Clip Let me know what you...
28
6 k
JustinRatliff |