All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Convert text to dynamic, real-time speech with nine expressive OpenAI voices-natural, varied, accessible robot communication.
Featured
Synthiam ARC controls Arduino robot with eyes, head and mouth synced to speech, using AIML/Bing speech recognition for audible Q&A.
robot
Mac's Irobot - Scuplture
Sculpture inspired by Asimov's I, Robot explores robots protecting humanity; face-tablet shows human faces and clips of war, pollution and decay.
9
6 k
Mac |
robot
Tameion's Connecting It All Together
ARC coordinates EZ-Bv3 robots and smart home control via voice (Ivona), MQTT/Mosquitto, EventGhost, OpenHAB and scripts.
41
11 k
Fob |
question
Ez-B V4/2 Comm Upgrade And Ez-B Iotiny
I would like to know if the comm bords of both IoTiny and the new v4/2 are the same? If yes, why does the v4 upgrade cost more than the IoTiny...
34
7 k
Jeremie |
question
Unabble To Connect To Ez-B V4/2
Hi, Just installed the EZ-B v4/2 comm board and i can´t get it to connect. Used both modes. This is AP. I get these errors as shown the snaps. Could use some...
5
3 k
Proteus |
question
2 Servo Speeds, Same Servo, Same Script
OK guys new question... Is it possible to have the same servo perform 2 different speeds in the same script, yes dynamixels. I need to run the arm up command just lower than full speed (8). However when arm is going down with it having its own weight it really races to the ground. I tried to set servo speed before each movement up/down but it did...
7
3 k
kamaroman68 |
question
Printing Out A Complete Six
Is it possible to print out a complete six robot. I guess I mean is there a complete set of stl files to do so? Thanks. Chris
4
3 k
Dunning-Kruger |
question
Iotiny
well that's decided then I'll be getting both the /2 upgrade and the tiny. Only question is any idea on an ETA of the IoTiny and the RGB 8x8 matrix. coz I'd prefer to order in one fell swoop
2
2 k
bborastero |
robot
DEISEL1863's A Robot That Has The Capabilit
Home-monitor robot detects fire, flood, CO, intruders, links thermal cameras, logs sensor & video, streams to devices, alerts and tracks family GPS.
0
868
DEISEL1863 |
question
Script Help Needed
I am having a little bit of trouble with this script. Everything works until I get to the "if" statement at the left and right sensor. So what it is supposed to do is not...
27
5 k
DJ Sures |
question
Cant Add Myo
When i try to add the Myo (Misc), the ARC crash. I have try 10 times. EZ is started as Admin in Win 10.
3
3 k
Stiko |
question
Thoughts On A Podcast?
I have a thought but wanted to get the communities input before I invest the time, energy and money to make this happen I am thinking about setting up a video podcast that focuses on EZ-Robot stuff. The thought is to produce a weekly show that would cover things asked in the community, network related things, ARC things, Plugin things. I would do a...
7
3 k
CochranRobotic… |
question
Shaking And Confusing Rotationservos Makes Me Grazy
I bought 4 brandnew rotationserver. One starts at 90 and is only 90 mobile. Even when creating a servo profile -90 it is only 90 usable. Another starts to shake after 2 minutes. It shakes back and forth between 30 and 90 . I tried different pin. The servoprofil is ok. 2 Servo function properly. I have make the lessons about servo and servoprofiles....
11
4 k
Stiko |