All Community Content
Synthiam Credit
Your Credit: $0.00
Lower the cost of Synthiam products by contributing to the platform and community.
Recent Robot Skills
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with hardware-timed PWM,...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for real-time...
Hitachi-LG LDS Lidar
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino...
Featured
Real-time VAD using 300-3400 Hz FFT to trigger scripts on speech start/stop, with sensitivity tuning, live audio level graph, and TTS pause.
Featured
JD dressed up for Halloween showcasing a festive costume and holiday spirit.
question
Error On Line 1: Capability 'I2C Master' Is Not Supported On This Device.
Was trying to use the mpu6050 plugin with an of the schelf mpu6050. When i...
15
4 k
lazaroOfarrill |
question
Ezb V3 Software For Windows 10?
Anyone have a link for ezb v3 software that will run on windows 10?
25
5 k
kwixson |
question
No Checkbox Workin
does the lewan servo's work with the iotiny? i notest that the checkbox below cant be checked.
4
2 k
Nomad 6R |
robot
Steve's Elvis Gains An Extra Degree With Ez Robot Hdd. Elvis Alive Robot Hack With Ez
Enhance 'Elvis Alive' WowWee robot: repair...
17
9 k
EzAng |
tutorial
Breaking Out The Sound From The V4 Ezb
Stream PC audio through EZB V4 to play robot sounds, with correct wiring and EZ Robot support tips for reliable hardware setup
10
6 k
Dave Schulpius |
robot
Jstarne1's Sky Anchor ,Gig Wifi Drone
Hex coaxial drone with 12 props and 15 lb thrust, 3D-printed frame to lift a WiFi antenna and camera for extended robot range via beacon tracking
13
3 k
jstarne1 |
question
JD Humanoid Won't Turn On
Good day fellas, Our lab just purchased a JD humanoid. However, when we try to switch on, this is nothing happened. There is no light and no sound. We checked the battery which can be charged and it was fully charged at that time. We are trying to find the solution to it, wish someone here can provide us with some support. Thank you in advance!...
2
2 k
Nomad 6R |
question
Is It Possible To Control JD Humanoid Through A Remote PC Over Wifi ?
Normally, we can connect the JD humanoid robot with a PC where ARC is installed. I checked that the JD humanoid robot is controllable within a typical range of 10-15 meters. However, I was wondering if we can extend the range as JD uses WiFi to connect to the PC. Can we keep the robot connected to a local PC but still use a remote PC from which can...
2
2 k
Jeremie |
tutorial
Add More Voices
Add more voice to your projects for richer interaction and user feedback.
9
21 k
Bobsheaux |
question
Servo Ports Not Working
ez-b v4 ports D2, D4, and D12 do not work. All of the servos work if plugged into different ports but are unresponsive when plugged into those ports. Upon initial assembly...
13
2 k
Dave Schulpius |
question
Encoder Reading With Arduino After It's Been Programmed With The EZ-B Firmware
I have little knowledge of Auduino's and their language. However...
6
3 k
Dave Schulpius |
question
Smtp Client Questions
Hey DJ, I have the SMTP plugin a go (really looking forward to using this), I seem to have it configured correctly to use my gmail account for SMTP, but when I run a script to...
26
6 k
thetechguru |