Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Play live web video and audio streams inside ARC from Chrome/Firefox, streaming directly to ARC camera control; network configuration may be needed.
Featured
Refurbish Emachine PC into quad-core 8GB system with 4TB storage, projector, Wi‑Fi and power brick for Omnibot 2000, hosting ez-robot and ez-ai...
question
Robot Drive Compontents/Parts
Here are a couple of links that may be interesting to everyone. Diverse Electronic Services Kadtronics
1
3 k
rgordon |
question
Ip Camera
Can you use Ez builder with an IP cam ?
10
6 k
pittom |
question
Hard Drive Access?
Is there any way to read or write to a hard drive within the ARC? I wrote a MS Kinect software application that writes Kinect date to text files and updates them in real time. (I call it the "painless data exchange protocol.") It would be really great if I could get Kinect data into ARC. If not directly, does ARC have the ability to run
3
2 k
TMesserschmidt |
question
Will The 2.5 Amp Motor Controller Work With This Motor?
https://www.robotshop.com/ca/lynxmotion-ghm-13-gear-head-motor.html Lynxmotion 12VDC 152RPM 231.05oz-in GHM-13 Spur Gear Head Motor 12vdc 141rpm, Gear Head Motor / Part no. GHM-13 Torque = 231.5 oz. in. Weight = 7.15 oz. Reduction = 30 :1 Length = 59.2mm (motor and gear) Length = 22.6mm (shaft only) Diameter = 36.8mm (motor and gear) Diameter = 6mm...
1
2 k
jstarne1 |
question
Sound Output
Hey there, I was just wondering if there was a sound output device included in the EZ complete kit. If not, do you know a compatible one? My Dalek must be able to threaten people! Cheers Al
1
2 k
kkeast |
question
Omnibot Load Test , My First Video Ever!
I loaded down a Omnibot with 40 pounds and still pulled around , I intend to have about 30 pounds on the vacuum bot......
6
2 k
jstarne1 |
question
How Would You Spend $1000?
So, hopefully someone on the boards will have some fun with this. I have $1000 for starting a robot project. Assuming I buy the Ez-robot board for around $140, what...
6
2 k
jstarne1 |
question
Turn Dc Gear Motors Into A Servo
Hey guys, Anyone tried something like this yet? This may be what I need to use for my arm motors. High Power Servos
40
11 k
robotmaker |
question
Some Questions About Ezb????
Hello DJ & Forum My name is SAKIS(Greece) I would like to ask a few questions a bout EZB. 1. at what point do I connect lcd screen, and how can I write to the LCD screen???? 2. Can i use this battery??? (how many volts must be the battery ???) 3.I bought the MMA 7455 3- AXIS ACCEROMETER. at what point must connec to the EZ B???? THANKS ALLOT...
3
2 k
sakis33 |
question
Omnibot 2000 On Auction Kings, Discovery Channel
I was just surfing through the channels and on the show Auction Kings. I've never seen the show before, but maybe I'll start watching. They just sold a brilliant looking Omnibot 2000 for $450.
0
2 k
hamchenko |
question
Bluetooth Connection
Got the ez-b today. I have tried all three laptops but can not get them to recognize the board. Don't know what to do. All laptops have bluetooth.
5
2 k
jstarne1 |
question
Fri Night Chat
We have started. Join in!
3
2 k
ww321q |