Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Diagnose EZ-B Wi-Fi connection issues with verbose EZ-B communication logging, ping tests, log export and diagnostic reports for Synthiam support.
Featured
Evolution of robotics: programmable robots, AI Winter, surge of personal robots and robotic vision through 50 years of robot-building history
question
What Type Of Info Is Need To Make A Hardware Work In ARC
i have a hardware design ,but since i dont know much about SDK or programming ,i need to know what is needed,i have API codes and each does and info it puts out Also have working examples in python and linux if that can help ,plus more hacking info
0
2 k
robotmaker |
question
Servo Amplifier
Hey everyone. I am putting together a BOM for version 2 of my bot. Its going to be humanoid type of thing. Head two arms and mobile base I am using some ideas from here. The arms are going...
9
3 k
Rich |
question
Robot Combat League- First Episode Online!
Those who fololwed my other thread on this TV show will be glad to hear that the SyFy channel has put the season premier episode online...
13
4 k
fxrtst |
question
Wireless Camera / Bluetooth
I've been trying to use the EZRobot wireless camera but whenever it is turned on, I lose bluetooth connection at a really low range (1-2m). With the camera off, the...
16
4 k
shreeny |
question
H-Bridge / Sabertooth Etc
I tried searching, but I can't find the answer, so here goes... I understand that the EzB doesn't provide enough oomph (Technical terms!) to drive a motor. However, what...
9
6 k
Rich |
question
Omnibot 5402
Hello. For a couple of years I am "only" involved in B.E.A.M-robotics based on analogue circuits. Now I like to modify an omnibot 5402 with ezb stuff. Never fooled around with controlling robots digital, based on microcontrollers and so. I am a bloody beginner on this and so I have thousand of questions... Here a few: Is there any kind of...
4
2 k
Rich |
question
Bucket Bot Thanks Dj Sures
Thinking about the effort that must have gone into creating the EZ-Bot Software and the foresight involved in the hardware design of the board.... DJ Sures made it so very simple for people to get into the hobby and I wanted to say thanks for helping me get started. Here is thee first of many projects:...
8
2 k
Erreul |
question
Xbox 360 Wireless Controller For Windows
Hi, Will the Xbox 360 Wireless controller for Windows work fine with ARC out of the box or will I need to program something custom for it? Thanks, Mike
1
2 k
Jeremie |
question
Robosapien First Project
I followed the video and I am currently at the following stage 1. Robosapien powers the ez-robot controller (red and blue light) 2. computer sees the card. (firmware also updated). 3. if I disconnect the servo cable from the controller the standard remote control works. When the servo cable is connected, it doesn't. 4. I have not hooked up the...
0
2 k
Thegallier |
question
Wall-E Builders, Unite! :D
I'm going to be starting up a Wall-E robot from the U-command Wall-e and the EZ robotics kit pretty soon. Does anyone want to share their ideas and talk about them? I'm gettin all excited hehe
9
2 k
Çhåøtìç_Røbøtï… |
question
Upcoming New Ez-Robot Website Features?
I was curious if there were any features you were willing to divulge on the new website. Any changes to the forums too?
10
4 k
Rural Geek |
question
How To Connect Radar Hc-Sr04 On Ez ?
Hi, i want to connect a distance radar HC-SR04 on my ez, but i don't know to do it. And I don't understand the tutorial of DJ. Is there anybody to help me please ? I had understand to connect on the Trig, Echo and GND on D0, then Vcc on D1. Is it right ? But on ARC you can use ADC0 for IR Port ! And how connect Vcc ( HC-SR04) on the ez ? Thank you....
3
2 k
DJ Sures |