Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Kinect Body Control
Control robot servos with Microsoft Xbox 360 Kinect body tracking; map joints to upper/lower body...
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
Featured
Real-time servo position input via Arduino ADC over I2C; supports Nano (6 channels) or Mega (16), configurable I2C address and scalable chaining.
Featured
Cookie Monster robot showcases EZ-B voice recognition and speech synthesis with dynamic phrase-triggered commands and rapid prototyping
question
Dj Customer Support
My order has been processing for 2 weeks ? I have emailed on it and no reply as of yet. I love the product . Edited i came off wrong shooting from the hip.
8
2 k
Antron007 |
question
Board Index In Key Control
Stupid question : How am I supposed to indicate on which board a key control is to be sent ? Thank you.
5
3 k
elfege |
question
Ar Drone
Hello! I am trying to build a script that will make the drone take off, then fly left and right (not turn, but really fly these directions - is that what's called yaw?) then Land. As well i am trying to build a script that will make the drone fly according to joystick movements, that i recorded for it in advance. I have tried this script:...
9
3 k
CardboardHacke… |
question
Two-Ton Robotic Mantis: A Hexapod You Can Ride In
Wow! I want one! robotic-mantis-hexadpod
3
2 k
jstarne1 |
question
Charge And Load Questions Searching For An Auto-Switching Circuit
Hello everyone, Does anyone know of any shield/ready-made circuit that would allow to...
8
3 k
jstarne1 |
question
Ez_Bsoftware Up Grade
I just down loaded the latest ARC software to a notebook I picked up that has Windows 7 starter on it. When I went to run the installer it said that I need to down load .Net 4 to...
7
2 k
Rich |
question
Camera Questions
I am using the EZ wireless camera and I have it setup on a pan and tilt platform. No matter what setting I set, motion, face, color all it wants to do is jump around. It will not track my...
3
2 k
Rich |
question
Automated Ez-Room
hey ARC s! I was looking to automate my room using the ez-board. I planned on being able to turn things on and off, weather reports, checking rss feeds, etc. I have a desktop computer in...
21
8 k
Tameion |
question
Now I've Gone And Done It.
That's right, all of your gracious time has not been in vein. I should have an ez-robot complete kit by Monday. Just in time to get comfortable enough to have to learn the new features in the soon to be released update. So, exciting!
10
4 k
Antron007 |
question
Ps3 Controller For Joystick
Has anyone hooked up a ps3 controller to the ARC. If so how can this be done, do you need a driver?
2
2 k
derrick |
question
Stopping A Servo With Voice Rec.
I have an arm with 2 servos, one raises and lowers the arm and one opens and closes the claw. I have VR set up to raise the arm when I say "JAC raise your arm". The vertical servo box in the EZ-B in the setting is set to stop the servos at the highest and lowest point of the arm so not to bind the servos. When I say " raise your arm...
3
3 k
Tymtravler |
question
H-Bridge Recommendations And Voltage
I am going to need 2 H-Bridges for my robot, one for forward, reverse and turns. and one for raising and lowering the robot. Do they make an H-Bridge that can do dual functions or do I have to use 2 bridges. I am trying to keep the amount of boards in the robot to a minimum. Second question is the motors on this robot are 7.2v and I know I can get...
14
4 k
thetechguru |