Robot Building Questions
Harnessing the power of ARC Pro, your robot can be more than just a simple automated machine.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Recent Robot Skills
ZAMA Emotion Model
Valence-arousal emotion engine generating persistent, configurable robot moods and event-driven emotional...
Feetech RS485 Servo
Control Feetech serial-bus smart servos via EZB UART or PC COM port; map ARC virtual ports to servo IDs with...
Feetech Serial Bus S…
Control Feetech SC-series serial-bus servos via EZB UART or PC COM. Map ARC virtual ports to IDs; supports...
Featured
Record and replay named servo movements with adjustable speed/direction (-5 to +5), multiple recordings, ControlCommand triggers and status var
Featured
Robi 2.0 with EZ-B 4.0: 21 servos, 22ft cables, 6 sensors, camera, LED boards, stereo speaker; 17.8 in tall, 5.0 lb, 6 months programming
question
Ssc-32 Servo Control Via Script
Someone on the forum contacted me via email and wanted a sample script of how to control the Lynxmotion ssc-32 servo board via a script.... I am posting it here in case anyone else might be interested... FYI ... ARC now has an SSC-32 control which is also supported in the auto-positioner.... #This is an example of controlling servos on the ssc-32...
2
3 k
Dunning-Kruger |
question
Power Bank For Robots
I am going to try one of these power bank unit for the ALTAIR EZ-1 they look like a perfect power source for this class of robot. www.storkz.com/powerall-pbjs12000r.html Specification 12,000 mAh Can supply 200 - 400 amps on a jump start. Weighs only 0.9 pounds (408 grams) Size 6.5 x 2.9 x 1.2 inches 6 hours charge time. Supplied with charger Cost...
4
3 k
Steve G |
question
New Roli Wired Per Instructions But Forward And Backward Are Reversed In Control
I have a new roli. This one for prototyping at work. When I added movement controls in the ARC, forward it backward and backward is forward. What is wrong?
5
3 k
Steve G |
question
Programming Architecture
I have yet to buy my first one and am curious about the programming model. I can't tell if you write programs that run on the device, or run on a host that talks to the device, or both. And I'm not sure what the platform is. It looks like a lot more powerful than an Arduino (which is slow and low memory), but I saw some post that made me think...
48
8 k
stakutis |
question
Is There A Tutorial How To Update Firmwire Ezb
is there any tutorial how to do this.
2
3 k
Nomad 6R |
question
Pandorabot Botid
I want to connect to my own PandoraBot using the PandoraBots control, but it requires a BotID. The PandoraBots website FAQ has this to say: What happened to my botid? What is an...
7
5 k
Steve G |
question
Is This Warenty
so i got the hex legs this morning.wgen i calibrate them al seems to , be fine.but when i connect D7 smoke came out.there is some knick in the wire. and a red from the motor is burn black....
9
3 k
Nomad 6R |
question
Check Out This New Camera From Omron
This camera has some unique features!
1
2 k
thetechguru |
question
Calibrate Al Back?
i calibrated the the head and schoulders.tomorow dhl brings the arms, of ez mip.do i need to calibrate all servo's back or just the ones that i ad?
21
5 k
Steve G |
question
How To Get Init Script To Go Slower Servo's?
am looking when i power jd on the pose he wil take goes slow. as in the video he does it slow but not when the init script runs.
21
5 k
Nomad 6R |
question
History Of Ez-Robot?
As a newcomer, I have found the community, DJ and staff, and the general atmosphere presented by the website to be very, very positive. I'd like to know more about the history of...
13
4 k
Steve G |
question
Best Website Management To Support Robotics-Based Startup?
I hope this discussion question is appropriate for community consideration. I'm way impressed with the EZ-Robot website, especially with the availability of finestkind resources and support. I'm wondering if DJ is willing to share the choice he made regarding in-house development vs third party website management. And just as useful would be...
3
3 k
DJ Sures |