Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
WebSocket server for ARC: accepts clients, stores messages, runs per-message scripts, tracks connection status, supports debug, needs Windows admin
Featured
Centaurus 2 Mars Rover converts EZ-Robot JD with 3D-printed parts into a drone-launching rover with cameras, rock collector and aerial recon.
question
ARC Screen Freezes After Connecting To Jd
I have had JD for a while without any problems but I can not get past the connection anymore. The debug says I am connected and it shows the right IP but immediately after I pressed the connect button I hear JD beep once and the screen freezes. The connect button goes dark but I can read "disconnect" on it. My OS is Windows 10 on an Acer...
5
2 k
Island fox |
question
Adventure Bot
I recently began working on 4 Adventure Bots I ordered for my classroom back in June. Unfortunately, even after downloading the Adventure Bot app, only one wheel works on 2 of the robots. I thought perhaps it was an issue with coding, but half of the bots don't have this problem. I was wondering if there is something technically I can do or if a...
6
3 k
kseitter |
question
Help Connecting Ed7273 Robot To Ezb
I got these 2 robots#1 "white" ED7273 cheap though unable to get feedback from Korean company that sold them (Originally 2012)..I would like...
0
2 k
Chiefavc |
question
Remote Areas No Wi-Fi Available,Ad Hoc
sorry just wondering about any ad hoc setting between ez b robot cotroller and my laptop/android phone. Will it work out at my cottage where we have no wi-fi available? I want to control robot outside at night to document animals coming around at night ,does the ez b still make it's own wifi connection to my laptop/cell phone? confused
11
4 k
Dave Schulpius |
question
Iphone Camera
I would like to know if anyone has used an iphone camera for an Ez-Robot camera. If yes can you send me to a discussion link or tell me how it was done? I am thinking about using it as a robot head.
5
3 k
Ellis |
question
New To 3D Printing Question About Print Layout
Hey all Im new to 3d printing. I bought a cheap printer clone (prusa i3). It actually prints surprisingly well for most small prints. I asked a couple days ago about printing out a full 6 hexapod and downloaded the files from thingiverse. I am using cura 15.04 which I believe is the newest cura software. My question is , can I change the...
13
5 k
cem |
question
Help Getting ARC On An Acer W4 Tablet
Hello. New to the Ez robot world and really excited to dig in. I've got my v4 and camera all ready to go but can't get the ARC software on my PC....
17
3 k
RoboHappy |
question
Jd:Sftwr:Comm:Bot2bot
PROJECT JAICS May I please inquire as to what are the SFHR's (Software & Firmware & Hardware Requirements, pronounced as "suffer") necessary to establish JAICS...
8
3 k
DJ Sures |
question
Mind Storms Lego
Has anyone wired an EZ comtroller to a Lego Motor? If so how? Thanks.
10
4 k
DJ Sures |
question
Save Servo Speed Settings
Is there a way to save the Servo Speed settings. I can't seem to find any info on it. I loose the settings when I re-load a project. Ron
6
3 k
DJ Sures |
question
Google Api Cloud Speech For Ai/Robot Control
hi guys and girls, My daughter somehow got me into this robot obsession. (I'm normally biased towards chemistry sets for kids being...
2
3 k
DJ Sures |
question
H Bridge Bigger Motor
Hello, i am upgrading the drive terrain of my robot. I bench tested the new motors and they draw about 2.3 amp at 12 volts each. what is a good h bridge that would do the trick? its a two motor drive system. Also i couldn't re find this thread i found, but it was talking about using a 12 volt motor with a h bridge to replace the function of a servo...
2
2 k
Dunning-Kruger |