Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Movement panel integrating WowWee Rovio with Synthiam ARC for remote drive, live camera, audio and docking control. Under development.
Featured
Little Frankie robot downsized to 1ft, built from mixed parts, driven by 12V motors and 11.1V LiPo, running EZ-B V3 and soon V4.
question
Help Out W Hackaday Contest I Entered My Ez-Robots, Thanks
Everyone! I need your help. I entered a technology contest on hackaday with robots I did with Ez-Robot...
7
3 k
Nomad 6R |
question
Speech Recognition+Autoposition Actions
Hi everyone! I have made an inmoov head and i want to use autoposition actions under speech recognition for eyes and moving head left and...
1
2 k
DJ Sures |
question
Is Blockly Coming To Script Manager?
Just thought I would put out a open question about this. I can't seem to find a way to use Blockly in the script manager control. 1st off I would like to give my appreciation out to DJ and anyone else developing this software. I recently got back into this after the SIX I purchased when it 1st came out has sat dormant for so long. This past...
0
2 k
SIRLAL |
question
Adjustable Actuator
Hi, I'm trying to setup a system that needs to deliver an adjustable pressure between 2250 psi to 3750 psi and at an adjustable rate of 1mm/second to 5mm/second. I'm trying to figure out if this is possible with an Electromechanical actuator or any other system ? I'm new to the field of actuators and apologize for any errors in terminology or...
5
2 k
Rob-bot |
question
Six - Reversed Direction
Upfront my apologies for a somewhat embarrassing question, but I am a total newbie with EZ robots. A parent at my school donated a Six to get some robotics classes going,...
6
2 k
Josekadams |
question
Robots
Hello Everyone I am new to this group however have been interested in robotics for several years now, I just had a few questions to ask the community. What do you think the biggest need we will have in the...
4
2 k
Rob-bot |
question
Rc Crawler Controlled Via Ez-B V4/2 And Camera Combo
Id like to be able to manually control my RC Crawler using an EZ-B v4/2 + camera combo. Ideally I would like to...
17
3 k
professorcake |
question
Is It Possible To Connect To Robot And Internet At Same Time
Hi, I am running tutorials and trying to program my robot at the same time - I keep having to switch my WiFi from my ISP network to the robot and back again. I could use my phone to stream the tutorials but does anyone know a way to connect to both the robot and the internet from a laptop? I'm guessing you might need some third party network...
10
4 k
DJ Sures |
question
Promo Android For New Westworld Season
A bit creepy,thought I would share this article..... eek https://www.dailymail.co.uk/sciencetech/article-5630065/Malfunctioning-robot-terrifies-drinkers-London-pub.html#v-5748112861154528269
0
3 k
robo rad |
question
Mon Robot Jd Ne Repond Pas
bonjour mon robot JD ne repond pas lorsque je lance l'utilitaire de profil d'asservissement fin un message me dit "this device is not an EZ BUILDER " ? alors que j'ai etabli la liaison wifi avec mon robot rien ne fonctionne! merci. Le Quere Jean stress tired
4
2 k
Jeremie |
question
Omnibot 2000 Build With Ezb
I have our omnibot painted and ready to put back together. Our main goal is to replace the light bulbs in the eyes with LEDS. I was wondering what pins on the ez will...
4
3 k
Nomad 6R |
question
Vertical Servo Jd
Hi, JD's head will move down but not up. We have tried the auto position, etc. Any advice? It was working but is not now.
16
4 k
DJ Sures |