Robot Building Questions
Become a Synthiam ARC Pro subscriber to unleash the power of easy and powerful robot programming
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Gaming Mouse Pad
While programming your robot, these 9x7 inch personalized mouse pads deliver a smooth experience with a custom flair....
Featured
Picture In Picture
Super impose a camera image on another camera image
Featured
E4-b4 Build Diary. (r2-d2's Little Brother)
Day 1 (4th August 2015) So after throwing around a few ideas for a new project to sink my teeth in to, I decided to go ahead and do my own...
question
Sam Inmoov Finger Sensor Made Easy
Problem: 1. Current finger sensors require to many moving parts to make 2. Personal problem is I know very little about programing but I am learning...
6
4 k
DJ Sures |
question
Wow Wee Rovio 2008 Tear Down , What’S Inside?
Let’s go
0
3 k
jstarne1 |
question
Sam Inmoov Build Starting Oct 2018
This is a build of the Inmoov robot. I will be moving at the speed of my 3D printer and life. I humbly hope to improve upon the great work that has...
3
2 k
Dave Schulpius |
question
Jd Robot Servo Question
My JD Robots servos start to buzz (and sometimes smoke) whenever I attempt to calibrate it. I later found out that Im supposed to manually tune the servos if they require more than 10 degrees of fine tune. I watched all the tutorials in the past, but clearly forgot some important information. My servos require more than 100 degrees of tuning. What...
2
973
Aqua |
question
Drd Parts
DJ, What are the rough dimensions on the DRD parts you recently uploaded?
10
2 k
jstarne1 |
question
Anyone Around Pasedena For Hackaday Super Conference Nov 2Nd?
Anybody out there ? I will probably be going to Hackaday Super conference and bringing a demo of my project for the hackaday challenge and I believe they announce the winners then too.
2
2 k
jstarne1 |
question
Tts Voice
Hi all, Im new to this robot stuff and having alot of fun with it, but looking for info. I want to try if my robot can speak Dutch. So Ive started to look for info and found Ivona - Ruben as a voice. Can anyone confirm that Ivona voices are working on the latest build of ARC and Windows 10 64 bit?
0
2 k
ExSerCo |
question
Robot Currently Operates By Time - What Would Be A Good Upgrade?
Hello there I am part of a robotics team. every year we get avrious challenges and travel to a competition. the challenge in the competition changes each year. last year we had to pick up milk crates and put them into various places. when the round starts, there were 15 seconds on which the robot drives autonomosly, and 2 minutes after that was...
1
2 k
DJ Sures |
question
Another Dynamixel Servo Plugin Request
Robots (Mfg. of Dynamixl servos) has released their TurtleBot 3 kits. TurtleBot3 is a small, affordable, programmable, ROS-based mobile robot for use in education, research, hobby, and product prototyping. (From Robotics) These kits include a Robotics OpenCR board to control the servos, a Raspberry Pi (with camera) as controller, and an LDS-01...
4
2 k
OldBotBuilder |
question
Alternative To Speech Recognition As A Fail Safe Method
I am looking to use JD as an assistant in a comedy show I am doing for children. I know the children can create a lot of noise. Therefore I need to find the best fallback if speech recognition does not work. Is a keyboard shortcut the best alternative?
5
2 k
DJ Sures |
question
Questions Connecting To Robots Wifi
All our robots seem to have issue connecting the laptop to the robot wifi. I have ran updates on ARC latest version installed 2018.09.30.01and it then shows update available but when i download the latest version ending in 02 in doesnt install? When trying to connect the laptop to the robot the connecting always times out? Any help on getting these...
1
928
DJ Sures |
question
Omnibot 2000 Riser
Want to make your Omnibot 2000 bigger? You can print this out and stack em up to the height you need your little guy to grow. The vertical striations are because I only printed it one...
7
4 k
MovieMaker |