Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Hitachi-LG LDS 360-degree LiDAR driver streaming scans into ARC NMS for obstacle detection, SLAM use, Arduino hookup, config options and variables.
Featured
DIY battery upgrade for Six robot: swap 1300mAh for a 5000mAh Traxxas pack for ~4hr runtime, custom connector and head-mount for balance.
question
Is It Possible To Use A Wall P
Is it possible to use a wall plug to power an EZ-B v4? Is one available for sale?
1
2 k
DJ Sures |
question
Hello,I Am Working With A 3
Hello, I am working with a 3 phase speed controller for my robot leg project. In order to change direction of the motor I need to either send +5V to a pin or ground that same pin. Supplying the 5V in not problem but how can I use EZB to apply a common ground signal to that pin on command? Perry
3
2 k
DJ Sures |
question
Who Can Help
initalvexgrippertest.EZB I need A lil help with some programming. It's been a year or so since I've written anything. I'm trying to set up a simple test with 2 grippers. I can get them to...
14
2 k
RoboHappy |
question
I Created A Remote Interface O
I created a remote interface on my PC and saved it to EZ-Cloud AppStore, and I can recall it successfully and control my Battle Bot with it on the PC. I then...
8
2 k
dicka |
question
Hi Dj, Let Me Keep The Questio
Hi Dj, Let me keep the question simple. The question is how to integrate the python script and c++ code with EZ-robot. I can understand that Ez-robot can promote and understand VB and c#. Any sample links and examples on how to promote the python script and c++ code with Ez-robot will be helpful.
1
2 k
DJ Sures |
question
I Am Currently Printing JD Fro
I am currently printing JD from the Thingaverse parts. https://www.thingiverse.com/thing:781145 Is there a list of parts somewhere so I know how many to print...
8
2 k
DJ Sures |
question
Checking Out This Robot
I plan on Hacking this Robot by adding some servos, a camera and speaker. I know @jstarne1 had some. Any advice from him and the members? I will take some pictures during the...
3
2 k
jstarne1 |
question
It’S Great To See New Products
It’s great to see new products coming to market soon. Is there any update to the neo pixel blaster board? Thanks.
0
2 k
kamaroman68 |
question
Who Loves $50 EZ-B V4s? Check
Who loves $50 EZ-B V4s? Check out Hobby King, they are having a sale! Just got a couple myself to add to the inventory!
4
2 k
robo rad |
question
Hi, I'm New To EZ Robot And Re
Hi, I'm new to EZ Robot and really enjoying it so far but I've hit a wall and need help. I have connected an IoTiny to a Ubtech Alpha 1s and used the plugin to successfully control the servos. I have a couple of questions. I've set the min & max positions for each servo on the servo control but I can exceed these values in the auto position...
5
2 k
DJ Sures |
question
On An Arduino You Can Use Anal
On an Arduino you can use Analog pins as digital pins (ie on an Arduino Nano pins D0-D13 are digital pins, A0-A5 can be used digital as pins D14-D19) Is this also possible with the EZ-IOTiny?
2
2 k
Tonlaar |
question
I Am Trying To Use EZ-BV2 In M
I am trying to use EZ-BV2 in my INMOOV robot, I came across Nigel Inmoov robot using you controller, How can I download his graphic to my frame? Thanks Ron
6
2 k
Ronbklyn |