slim6072

How To Cancel An Order

How do I cancel an order? I see no cancel button?

Which Ezbits Do I Need Tio Print For Six

Which servo parts do I print to make Six. I have my ezb4 n order wanting to print my own Six Which ones and how many of each?

Ez Bits (Specifically Servos) For The Hexapod

I am going to attempt to use one of my v3 ez-board to control this hexapod. I have just about finished the print. Now I need to put servos in in the ez bits what servos do I need to get to fit?

Has The New V4 Controller Started Shipping Yet?

Have the new controller started shipping yet? Looking at building a hexapod now wither with this or ExtraCore 32 Channel servo controller I prefer the V4

Digital Ports On New Ezb 4.0

Will I be able to plug the Servos Directly into these port without a voltage regulator? Can I use my old PING from EZB directly with the new board without voltage regulator? If I need a regulator should I use a 11.1V Battery and turn it down to 5V

Face Reconginition

So I am using DJ Wall-e Big Program I have had to adjust a lot of the min max servos setting inverting and such as well When I try to run the follow my face script I look straight into the camera. Wall-e head/camera looks all over the then down and say aww. I try to look on my pc I camera window I see red squares and such but most the screen is...

Blinkm Leds

Can you plug in more than 1 I was thinking of using these as they eyes

Ez-B Face Recognition

I have the camera up. I am using the EZb robot example for Wall-E I starty this face recontion script Wall-e gets into potion but the camera does not lock After a few seconds scripts end nothing else happens Is there a calibration or something?

My Walle

How did you get the gears on the wheels? I am afraid I am going to break it

Wall-E

I just received my Wall-E on E-bay Did DJ use the MP3 Trigger for his Wall-E? Do I need a inline amp to the speaker?

Wowwee Rovio Wi-Fi Enabled Robotic Webcam

Any experiance with this one. This one really looks cool

I2c Header

Is there a female to 2 Male Splitter cable for this header?

Ez-B Control Power Pins Above D14

There are a couple of pins above D14 on the EZ-B Controller If I have the batteries plugged into the power port can I also plug power onto these pins as well. What are the requirements? What is the best way to use them? What is the primary purpose for these extra power pins?

Robosapian V2

Just bought one from a swap meet Look like it is good shape The Remote look like it works. The body not working at the moment Going to buy new batteries and see what happens Has ezbot been able to crack this guy it almost 2 feet tall and grey from shaper image it is signed by Mark Tilden on one foot

Mp3 Trigger

I watched DJs video on how to wire it up. I think I can handle that. Wanting to know what size speaker (ohm/watts) to use.

Brookstone Rover Camera

So I just received my Rover I have the key control working I have the WII Remote working I have the Voice Recognition working When I turn up the camera and select rover the screen is black no video However if I select USB camera I have video and intermittent movement I can move it with the keys and or the WII remote but the rover will still move on...

Ez-Robot Servo Spline Size

What is the size or spec for the EZ Robot supllied Servo splines 24T C1 25T 3F Or something else altogether. Trying to put bigger wheels on the servos

Wii Remote Speaker & Mic

Is it possible to here the audio and or use the mic on the WII remtoe for sound and speech recognition?

Glyph Detection And Tracking

Is there a list of Supported Glyphs? Can I create my own Glyphs?

E-B Software Robot Support Question

Is the Rover 2.0 App-Controlled Wireless Spy Tank supported thru the EZ-B S/W Platform?

How Can I Use Multiple Modified Servos?

I have two kits I am trying to run all four continuous servos Only can get two to run

Where Can I Find Larger Servo Wheels?

Where does one get bigger wheels The ones that come with the kit are real small really limits your build

I Received My EZ Robot Kit Last Night

Been playing with it ever since. Anyway I am having some issues. I am sure these are operator errors not problems with the gear In any case I ran the servo calibration example on all the non modified servos No I am trying to make a head move left and right using the horizontal servo tool in add control I have it on D0 When I look at it it shows min...

Camera Recording

Can I record with he camera that comes with the ez bot kit

Adruino Sensor Support

Does the EZ BOT GUI support Adruino Senros (IR, Sonic, etc..) Natively Or do you have to script If scripting then what do you use

Parallax Support

My first robot is parallax I have added a couple of add ons to the initial boe bot Like the speak to text Emic2 and QTI black line sensors It also has 2 continuous servos Will any of this work on my new ez-robot platform? Also can you suggest a good all around bread board.

I Purchased The 4 Wheel Drive With Crapler Arm

I am trying to get figure out how to make the vehicle turn Do I put both left motors (Front and Back) on one circuit then put the two rights on an another.