Profile Picture
PRO

dbickert

Country: USA
Member Since:

Achievements

  • 2016-04-27 - Joined Synthiam
  • 2016-05-03 - Connected ARC to cloud
  • 2016-05-22 - Created First Robot App
  • 2016-06-19 - Joined First Discussion
  • 2016-06-19 - Created Custom Avatar
  • 2016-09-10 - Created First New Discussion
  • 2016-09-21 - Shared First Photo
  • 2017-03-01 - Shared First Video

Latest submissions

No robot skills have been created here yet. Click here to view the Robot Skill Store.
No Synthiam robots have been shared here yet. Click here to view the featured robot projects.
question
Getp Command For Kangaroox2 For Use With If/Endif??

Getp Command For Kangaroox2 For Use With If/Endif??

Hello everyone, I am trying to create a simple condition using a Kangaroox2 and two motors with independent control....
question

Ez Builder No Longer Detecting Ezb's Or Camera Ip Addresses Since 2018.09.01 Upd

For some reason when I updated to the newest EZ Builder Release, I am no longer able to discover my EZBs and/or camera IP addresses. EZ Builder will find them but it no longer lists them in the Discovery Window. I can connect to them but their custom names do not populate because they don't register in the Discovery Widow. I have another PC that...
question

Voltage Regulation Question

Looking for help! I have a Drok regulator and an 11.2v 5200mah LiPo battery to power my EZB. My EZB keeps telling me my battery is low when I have the battery passing through the Drok at 7v. The problem is that the amps are not pulling through the Drok enough to juice the EZB. The EZB is only receiving .18ah. When I plug my smaller 7.4v LiPo at...
question

Kangaroox2 Sendserial Commands

I have searched and searched for the proper sendserial command structure for controlling a kanagaroox2/sabertooth 2x12 setup and am not getting any answers from DE. They are clueless when it comes to their own devices at times. In any case, I have successfully tuned my kangaroo and have been able to use servo commands to control it in independent...
question

Kangaroo X2 And Sabertooth 2X12 Independent Motor Control Question

I have a kangaroo x2 and a Sabertooth 2x12. I can get successful tune on Channel 1 but not on Channel 2. Has anyone managed to get a KangarooX2 to successfully run independent motor channels as Dimension claims it can. I am installing the hardware in an R2D2 Dome Periscope that uses one motor to lift the scope and a second motor to rotate it. I...
question
H Bridge Control Without Using A Movement Panel

H Bridge Control Without Using A Movement Panel

Hi everyone, I have scoured the forums and for some reason am drawing a blank on this one. I have a 12v track actuator...
question
Using The Camera To Detect Multiple Objects With A Different Script Execution Fo

Using The Camera To Detect Multiple Objects With A Different Script Execution Fo

Has anyone been able to teach their robot to recognize...
question

I Think My Ezb Has Fried

I believe my EZB has fried. Tonight it refused to be accessed over wifi and it won't reset. I've attached a video so you can see what it's doing upon an attempted reset. I went ahead and ordered another one because I don't have time for a resolution for this unit, but if it is able to be resolved I can use it on a future project. Any thoughts?
question

Sony Move Controller And Ezb

Hi All, I was searching the forums looking to see if anyone has had success getting the EZB and Windows to work with the single handed Sony Move Controller for PS3. I'm currently using a move controller with an Arduino Mega for driving a sabertooth and I would really love to ditch the mega. Anyone have any info, links, or ideas? Thank you, Douglas
question
Sabertooth 2X32 Operation

Sabertooth 2X32 Operation

Hello Everyone, I have been at my workbench reading all of the Sabertooth threads in the forum and for the life of me can not figure out how to get my sabertooth to do...
question
Can You Control More Than One Ezbv4/2 In The Mobile App?

Can You Control More Than One Ezbv4/2 In The Mobile App?

Am I missing something? Can the mobile app control multiple EZBs? I am using two in my robot and one is a...
question

Small Headset Mic Suggestions Needed

Hello Everyone, I am looking for a small wireless headset mic with a mute function for when I am using voice control with my R2D2 in a crowded room or convention. Does anyone have an good suggestions? For some reason I am not having any luck in my search; they either don't have a mute button or are designed to work with a cellphone. Any help is...
question

Mobile Interface Emulator?

Is there a way to have the Mobile Interface work on my iPhone without having my phone take over the processing? For example, I need to use my laptop because I need two EZB's bridged inside my robot and the mobile app will only control one. I need a mobile interface but can't have the phone take over processing. I was able to download Joypad from...
question
Need Help Controlling An Led

Need Help Controlling An Led

Hello! I have a project that I need to create an animation paired with a sound file. I need to be able to control a single LED and have it randomly flicker when I...
question
Soundboard Not Triggering In Mobile App

Soundboard Not Triggering In Mobile App

Greetings everyone! I have a script that triggers my soundboard in EZ Builder (Windows) but it does not trigger when I am in the mobile app....
question

Bluetooth Joystick Coupled With Mobile Interface

Greetings everyone! Is there anyway to use a bluetooth joystick along side the mobile app interface? I am controlling a sabertooth 2x32 and a Syren 10 with servo pads and when I try to recreate it in the mobile app, it just isn't as responsive as the pads on my laptop. I am running the app on my iPhone 6S plus with the EZB in AP mode. It would be...
No live robot hacking sessions have been created here yet. Click here to view the past live robot hacks.
No user tutorials have been created here yet. Click here to view all user tutorials.
No firmwares have been created here yet. Click here to view robot hardware and firmwares.
No 3D Parts have been created yet through ARC. Click here to view 3D printing robot library.
No features have been requested yet.