All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
PCA9685 Servo Driver
Convert an EZB I2C bus into a 16-channel PCA9685 servo controller, exposing V0..V15 with...
Rplidar
Slamtec 360° LiDAR driver: calibrated, offset/rotation-adjusted scans published to ARC NMS for...
Featured
Connect Intel RealSense depth cameras to ARC NMS for depth-based distance detection, point-cloud mapping, video streaming, and navigation telemetry.
Featured
Convert a Shark Steam Spray Mop into an EZ-Robot Steam Spray Mop-DIY robotics upgrade inspired by Team DJ
general
EZ-Robot Building A New Platform
Now I am intrigued. I received a survey from ez-robot about a new platform. they didn’t say what the definition of a new platform is, hardware, software, both but they did mention sensors in the email etc. they are focused on education market now and not pure DIY so curious if anyone has inside scoop. the obvious question is what do you want...
16
2 k
WiinterU |
question
Reviving An Old Project
Hi everyone, is it ok to share my project here? I wrote an intro post and when i went to send the whole page disappeared and i lost all the text. It's around 80% completed.
38
2 k
Toyhackrobotic… |
question
DE Sabertooth Controller Runs Motors On Its Own
Yes this a stange one. So, I have the 2x15 Sabertooth controller in use with my Hemi robot (see other thread). Im using the custom movement panel, and thanks to help from everyone I learned how to create serial commands needed to operate the Sabertooth. I have it nicely working with voice commands. What I am having an issue with is that...
9
8 k
RoboHappy |
general
@DJ And Your Music
Hey DJ, I've been thinking about the music you used to write and produce. I really liked the stuff you created. I haven't found any lately. Have you worked on this area of your interests lately or is it a past passion? Any chance of posting a link to your music library that could be either listened to or bought? Sometimes I put background music...
5
899
WiinterU |
general
Interesting Project From 2015
Basically i was scrolling through youtube and found a robot that used both an EV3 board and the EZ-B4 controller board. any thoughts on this? (Credit to Irvin...
2
838
EzAng |
question
My Tomy Omnibot 5402
Hi everyone, very happy to say my Tomy Omnibot is on the way from the USA to here in Australia. What was great to see was after i had ordered the Tomy, i saw Dj Sures youtube...
8
6 k
Toyhackrobotic… |
question
Benefit Of Onboard Computer
Hello to all the members of the community here. I am starting to build an InMoov robot project using ezb controllers and want to understand what if any is the...
33
3 k
Dave Schulpius |
question
Need A USB Camera Recommendation
Hey all, it's been a lonnng time. And honestly, the last two years have been very difficult on my family and I, but re-fitting my iRobot sculpture has been...
21
2 k
Mac |
question
Latest Free Teams Arc Dead
Tried downloading latest free Arc Teams but installs then just a spinning circle for 10 seconds, then nothing? Paid version will come on but no subscription....Runtime...
7
2 k
Dave Schulpius |
question
Pydroid 3 Scripting Using Ezbv4 And Accessories Vs Arduino Micro Controllers
Repost due to either accidental deletion by me or error : So I know...
6
3 k
Toyhackrobotic… |
question
First Servo Command Triggers Movement Of Other Servos
Dear community, I observed a curious problem and wonder if anybody has seen this before. When I start my EZ-B and operate a servo (e.g. open a panel/door) for the first time it spontaneously triggers the movement in other servo's as well (e.g. opening other panels/doors). It is only the first time. E.g. after I close all panels/doors that...
7
996
Dave Schulpius |
question
Iotiny Over WIFI Disconnects Immediately After Connection
Hello! I have the following setup: Port 0 : IoTiny configured in AP Mode as master Port 1: Arduino via USB...
38
2 k
Dave Schulpius |