Since my robot is running on a Raspberry Pi, which is now supported by ARC, I decided to evolve my current project K[8] into a new one called ZOE... First steps will creating a new servo setup which supports Dynamixel Servos, and a new Conceptual design!!
By Mickey666Maus
— Last update
Other robots from Synthiam community
Ezang's 3D Printing Again 7/18/2021 - Detecting A Sound File...
Here is Mr. Metal again for those who missed him. Might need to turn up volume Please leave a comment, Thanks EzAng
Cardboardhacker's Rover Ad
This is the thread for my current project Dewy. He is a tall robot that uses RAD parts and models a omnibot in a way....
Fisha's Wall-E Wall-E From Poland - Tribute To My Newborn...
Hello Everyone ! First of all I would like to thank all of You for great inspiration to building robot, specially DJ...
sure i take the bodem first.
the bottem block is 120x124x106.8 MM
the top block is 80.0x83.0x85.7 MM
oops i think i didn understand you the first time. all is ok now.i allreddy printing. the head frame.
mailman is back.today i got these 2 boards. very tiny .
tonight or tomorrow i will have the aduino zero.Hey Nomad, I also ordered the board, I will modify the head frame so the board will fit in... Maybe we need a micro USB cable too?
Lets see the instructions that @ptp will post, then I will start building the new head frame!
Did your print turn out good, are the Oleds fitting?
"are the oleds fitting " no the frame will no work,still no sucses. i have cura 6.4.1 latest version.i dont have a clue why it dont work. also the tower didn work.i think i have a chost in my machien:(.
@Normad6R Are you saying the print failed or are you caying the printer itself is not working? are you connected to a computer and are printing using a USB cable from computer to 3d printer or are you printing from SD cards.
hi nallycat
not connected to pc.using the sd card. the tower didn work cause i didn knew how to change filament while printing. and the nozzle bumped into the part.i have figured this out and try back tomorow printing. the head frame doesn work alway diff messurement.a diff of 1 mm to 1.5 mm, but mickey is gonna design a new part .
thanks for askin