Starnes Free 50 Amp Esc And Axi 2800 Motor Contest

Question

Starnes Free 50 amp esc and Axi 2800 motor Contest

We have a special contest today , two new swift 50a esc and two New axi gold 2800 , this is 350 dollars of motor controllers and high end motors. It's simple to win , post your ideas of how you would use these in your robotic project , you can write a paragraph or more explainong concept , sketches or diagrams showing how you would use it , or even pictures of placement of where it would go in your current robot (that means even lloyd can jump in on this). Between voting from members and my personal discretion I will award a creative member these items.

jstarne1 · Answer

bret.tallent · Answer

Josh you are the man! I only wish I had a use for them.

jstarne1 · Answer

I'm surprised there are no interested members

imrisaac · Answer

power system for a amphibious tankbot. a simple propellor to power the bot effiviently while in the water

peterfrisch · Answer

As someone in "Home improvement" used to say: "More power!". But I guess my little caterpillar would just be ripped apart, if I used one of those babies But I love the idea of your contest!

jstarne1 · Answer

Omrisaac , what base are you going to use? Material? Would it be ex or ezb controlled?

budel0 · Answer

Hi, I would try to build one of these and use the air intakes as to suck air in and transport it to each of the props like the the dyson bladeless fans. I would stear it with servo's and put on large rockets and stuff.

imrisaac · Answer

ahhh haa i thought of a better idea. a motor to run a small compressor that would power a small pnumatic system for my bot. a pnumatic gripper, air suspension, the possibilites are endless. air cylinder https://www.hobbyking.com/hobbyking/store/__8353__Air_Actuator_40mm.html  here is my tankbot i would put it on https://synthiam.com/Community/Questions/781 ps. that dyson fan thruster is a cool idea too!

jstarne1 · Answer

Bude , lol that's what I bought these for , o built a scale model of avatars heli , even have the 8.5 inch props and hub adapters for them. These ideas are getting better , only catch is I send whoever wins hundreds of dollars of free stuff I want to see a build thread up and going lol. So imrissac you would connect yours to a small compressor , hmm very interesting I like that , ofcourse you only need one I believe to run a small compressor. Come on details details I love where this is going.

jstarne1 · Answer

Omrisaac , what kind.of bot would you.use these pneumatics on? Personal around the house.bot? Outdoor? Brattlebot? Just remember we want to.keep it in the range.of.something that can be.built and.ofcourse I'm.happy to help.

budel0 · Answer

@jstarne, I was already planning to build one, but first have to finnish my current bot... Damn, already have ideas cooking up... I might make some CAD drawings for the mechanics and prepair it for when my current bot is finnished. So I can get the parts made. Note: that it will be huge... I'm thinking 1 meter long or something, in the end it will depend on the motors and how much lift and more. Ahw now I'm all excited... Probably going to start designing tomorrow... (can't help it)

jstarne1 · Answer

These motors make 4 pounds thrust each with 8x5 three blade prop

imrisaac · Answer

Here is the bot i would put the pnumatics on. it is still a work in progress plus i have it half way torn apart while ive been cleaning up he wiring and revising some parts.

jstarne1 · Answer

Wow your pretty far along in this project , what are you going to do with pneumatics?

robotmaker · Answer

if i get the motors they might work for my quad copter design looking for low profile motors

jstarne1 · Answer

Alright members , its between Omrisaac and robot maker , who should get the wonderful , new , top of the line equipment. ? ?

robotmaker · Answer

bought some fiber plastic to very light weight,usinfg EZ board ,gyro,and looking at a way to add a altimeter

imrisaac · Answer

I think im going to put a pnumatic suspension system on my bot for adjustable ride height and stiffness. Im thinkg about having four seperate pnumatic cylnders oberating 4 individual suspension arms for the road wheels and of course its all powered by the brushless system running a small compressor to fill an air tank. Alao i might wire the suspension to an accelerometer, gyro, flex, or other type of sensor for active stabilization. Finally later i might think about making it amphibious some how.

jstarne1 · Answer

Imrisaac you win man the idea to use a motor to turn a compressor was really the most creative and you already started the project.

robotmaker · Answer

@imrisaac great project,you deserve it,it will be awhile before i need the motors ,have a few projects to finish first,plus busy looking for a bigger house for my robots and my girlfriend moving it,looking at a 5 bedroom house ,one room to design and build my robots hope to see your progress on your design cant wait to get home sunday for my work trip got 2 robots waiting for many the SPC-101c EVER HEARD OF IT ,GOES FOR $2500 TO $3000 AND HARD TO FIND PAID $1000 THATS MY MOST IMPORTANT ROBOT DESIGN well guys and JOSH leaving cleveland,ohio in 2 1/2 hors cant wait to get back and start hacking ROBOTS ,so last post

imrisaac · Answer

Cool can't wait to get started!!!

jstarne1 · Answer

Email me kandyred@gmail.com Congratulations!

jstarne1 · Answer

Now that.he won the contest we get to see him start building these into his menacing tank

jstarne1 · Answer

Congrats! Your prize is on its way out , I hope you enjoy them and I look forward to the progress of your robot.

robotmaker · Answer

my 2 robots are in,SPC-101C is a super cool robot,i see why its $3000 and HEROID robot looks in very good shape too,plastic dome has a few light scratches ,easy to remove @jSTARNE motors you had wont work for my QUADCOPTER ,so its great you found a new home for it @IMRISAAC cant wait to see your progress on your robot,have little more work on my ROOMBA project,THEN a little on BROOKSTONE ROVER project then i cant wait to build my OMNIBOT 2000 project,JOSH has a couple of ideas using on mine,but i am adding alot more ,higher torgue,motor feedback and a lot more

imrisaac · Answer

guess what came in the mail today.

jstarne1 · Answer

Is that a happy face ?

imrisaac · Answer

i busy this weekend so i might not be able to get started right away

imrisaac · Answer

still havent forgotten about my pnumatic system. just very busy.

jstarne1 · Answer

Yea man ya disappeared on me! How is it going ?

imrisaac · Answer

sorry ive been rebuilding the motor in my car so between that school and work ive been busy. also thought of another possible idea though along with the pnuematics,

jstarne1 · Answer

You dive alot? Those are high rpm motors they may not work well in that situation , underwater props have a 6 times more aggressive pitch than regular props so they spin low rpm. Those motors are high amp high power but you don't want to put them in a completely sealed container they need air to pass through them , at least a little just to stay cool.

imrisaac · Answer

it was just an idea

jstarne1 · Answer

Yea man its cool.

jstarne1

Starnes Free 50 Amp Esc And Axi 2800 Motor Contest

Upgrade to ARC Pro

Products

Community

Support

About