Camera Disabled?

Question

When ever I try to start my camrea in my Roil I get an error: "Camera Disabled" When I turn Roil on the camera light blinks blue so I know it's plugged in and getting power. It's just from the ARC I can't seem to start it. Anyone run into this?

Dunning-Kruger · Answer

Are you able to connect to your EZB? Which mode are you in, wp or client?

davidwlake · Answer

I can connect. I have the movement working. I have tried it in both WP and client. I'm currently using client.

thetechguru · Answer

Try unplugging and re-plugging the camera. If the connection isn't tight it can cause that error. Camera may have power, but not a good signal. Alan

davidwlake · Answer

@Alan Yeah I've defiantly tried unplugging it. I just pushed the clip down in case and tried connecting still says Camrea Disabled.

davidwlake · Answer

The full error out put is: Quote:12/3/2014 2:08 PM - Camera Initialized: EZB://192.168.1.12 @ 320x240 12/3/2014 2:08 PM - EZ-B v4 Camera Error: System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) --- End of inner exception stack trace --- at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at EZ_B.EZBv4Video.() 12/3/2014 2:08 PM - Camera Disabled

DJ Sures · Answer

Does the blue light flicker? You may need to cup the camera in your hand to see the light flicker.

davidwlake · Answer

It flickers when it first turns on. After that nothing.

Dunning-Kruger · Answer

Hmmm, I had a camera that did that... turned out to be faulty so it was sent back to ez robot...

Jeremie · Answer

Hi @davidwlake, please Contact Us and we'll get it sorted out.

davidwlake · Answer

@Jeremie I will thank you.

davidwlake

Upgrade to ARC Pro