Robot Building Questions
Unleash your creativity with the power of easy robot programming using Synthiam ARC Pro
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Featured
EZ-B Settings
Configure saved WiFi settings directly to the EZ-B v4 made by EZ-Robot
Featured
Ezbv4 Robot Lawn Mower
When I decided to design and build a remotely controlled lawn mower, there were two main requirements that had to be met before the project...
question
How To Make A Car Follow Me
How to make a follow me car
9
646
DJ Sures |
question
ARC Connects To Wrong EZB Sometimes
I have an odd problem that happens sometimes. Ill preface this issue by saying this has happened in the past a number of years ago. I have a robot that has three EZBs connected to ARC (Two regular EZBs and one IoTiny) over WIFI in client mode. The two full sized EZBs are v4s. My problem is that sometimes the ARC connection skill will connect to the...
11
810
Dave Schulpius |
question
Two Robot Heads Talking To Each Other
I am trying get two robot heads to talk to each other. They are both clients on my wifi network, and I am using one computer, and one speaker...
11
771
Nomad 6R |
question
Servos Moving To Extreme End Of Travel On Connection Of EZ-B
Why are my servos jumping to an extreme end of travel when I connect to the IO-Tiny? It moves so fast and bind the robot mechanism and reboots IO-Tiny. What is going on?
5
589
DJ Sures |
question
Two Robots
How do I conenct two robot heads to one computer?
1
367
DJ Sures |
question
How Do I Operate The Mycobot 280 For Arduino With Mega2560?
I connected my mega2560 board on the mycobot 280 for arduino to operate with oculus quest robot skill in Arc. In Arc, coordinate values of oculus quest can be archieved but nothing happend in the auto position skill. I guess that there are some problem about communication between mega2560 and mycobot 280. I have installed your EZB plugin for...
1
728
Nink |
question
Building A Humanoid Robot
I am building a humanoid robot and trying to figure out how to use ARC. I first want to start out with getting the chatbot part working and talking to it on my laptop...
12
2 k
Dave Schulpius |
question
I Have Some Error Message.
In the Arc, Im tryring to use virtual reality robot skill. I connected single camera and follow the every step of your instruction. But when I start to run oculus robot skill in Oculus, I encountered client disconnected error message. What I have to solve this problem?
1
356
DJ Sures |
question
I Have A Question For Mycobot 280 For Arduino
I have a mycobot 280 for arduino. I connected my mega 2560 board on it. I downloaded ezb for mega and uploaded that the mega 2560. Then connected that board on the mycobot 280 for arduino. But nothing happend in the virtual reality robot skill. I missed something?
0
729
hymecer |
question
How Can I Install Ezplugin File?
How can I install oculus quest ezplugin file in ARC?
0
544
hymecer |
question
What Is The Ezplugin File?
What is the ezplugin file in virtual reality robot?
0
428
hymecer |
question
I Want The Value From Movement Joystick To Pass It To Movenent Script
i want the value from Movement Joystick to pass it to movenent script?
6
343
DJ Sures |