Robot Building Questions
ARC Pro is more than a tool; it's a creative playground for robot enthusiasts, where you can turn your wildest ideas into reality.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
22oz Vacuum Insulated Bottle
Keep liquid away from my robots! Vacuum insulation is a big deal if you care about beverage temperature change during...
Featured
MPU6050 Tilt Angle Sensor
The MPU-6050 sensor contains a MEMS accelerometer and a MEMS gyro in a single chip. It is very accurate, as it contains a 16-bits analog to...
Featured
Life is like a tight rope, do you agree with this?
My tight rope robot, squeaking by, enjoy once again
question
How Do I Interface With This LCD Display?
On the back of my Robot spot I have an 16x2 LCD display. I need to interface with it so I can display information about the robot and what...
7
754
DJ Sures |
question
Horizontal Servo
Horizontal servo control, now it will not let me save when I change the values ? same with the vertical servo control
6
780
DJ Sures |
question
Blockly Paly Audio Question
I noticed in Blockly play audio only works with EZB sound board not PC soundboard, or am i Missing something?
4
722
EzAng |
question
USB Connection To EZB V4
OK guys I have another question for everyone can you use the UART on the EZB V4 to connect to a USB rather than the camera port? I want to hardwire my EZBs to my onboard PC...
70
3 k
Jeremie |
question
Help Add Skills Is Lost
is there a way to fix not seeing add skill?
2
718
DJ Sures |
question
Waitforspeech Question
I have a problem using WaitForSpeech - I wonder if you could please advise DJ? On my Win7 computer it does not work at all - there is no timeout the seconds variable gets...
25
4 k
EzAng |
question
Suitable Mini PC To Support ARC Software
What mini PC would you recommend to use with ARC for a robot? I have been reading about Kangaroo mini PC, LattePanda, Raspberry PI, MeLE...
44
3 k
DJ Sures |
question
Wifi Dongle For Internet When In AP Mode
I did send this question to RZ-Robot but havent heard back yet, I thought someone here may have an idea what is going on. Im using several EZBs in my robot. I have one in AP mode connected to my PC and the other EZBs set in Client mode and connected to the one in AP mode. All works well and I can connect with ARC just fine. Of course, I have no...
4
2 k
Dave Schulpius |
question
Jd 3D Printed 5 Fingered Hand
jd 5 fingers hand hi has anybody printed this hand ?i cant open the stl in ARC.i cant see if theres a left hand too.
21
3 k
Nomad 6R |
question
H Bridge Control
The H- bridge control keeps giving me this error, it aways worked before, even last evening Now I get this message: Why does it not work today?
3
654
DJ Sures |
question
3 Pin Connect Rgb
hi is it possible to use the rgb slot from iotiny for an led with 3 pins? i wanna try to control the meccanoid led ( eyes ) with the iotiny rgb .
2
773
Nomad 6R |
question
Meccano Rebuild
How to program a Meccanoid using ezb v4 with ez HDD servos? Some codes examples would be appreciated, thanks
1
692
Nomad 6R |