Robot Building Questions

Hello Everyone,We Have 4 EZ-

Hello everyone, We have 4 EZ-Robot Humanoid JD. The 4 ez-robots are 2 years old. We tried connecting via phone and it worked but the capabilities of the phone software was limited. the PCs we used and had the software recently downloaded wouldn't recognize the robot at all. But one of the teammates who had the software downloaded from the first of...

Hello Community,I Would Li

Hello Community, I would like to deploy something similar to this project NeoPixel Ring with Arduino as control board but I need to use LED strips. 60 LED qty. Will this work for LED strips? Or is there a simpler way to control many LEDs with the EX-B Help is greatly appreciated. Thanks, Mark

We've All Seen It.  The Super

We've all seen it.  The Super Armatron has it, the Omnibot 2000 has it, and if you take away the head of Gypsy from MST3K, it's all you have left!  I am of course talking about those fun bits of rubber tubing that add a clean, industrial flourish to any robot.  I'm in the process of taking an old Robie Sr. and giving it the same treatment that DJ...

I Am Getting A No Internet

I am getting a "no internet" message on ARC Mobile, despite following the procedure on The Robot Program 025. I am connected to the EZB-v4/2 in my Adventure Bot but when I try to get the Remote Control it doesn't happen. I do get internet on my phone through my WiFi network (I don't have a data plan on that phone). My PC has an Ethernet...

Want To Connect A EZ-B V4 WIFI

Want to connect a EZ-B v4 WIFI Robot Controller to Meccanoid Servos using a arduino UNO. Need harware configuration. Arduino code. Sample code to drive the servos Thank you for help.

Is There An SDK For EZ-B That

Is there an SDK for EZ-B that would let me design my own Blockly interface?

Wondering Something

https://www.ez-robot.com/Shop/AccessoriesDetails.aspx?prevCat=9&productNumber=14 298 h bridge I probably asked this question before but can't remember the answers from a few years ago I bought this H bridge,used 6 volt motors,for long periods of time outdoors,a really great product, just wondering about using for newer higher torque car window...

I Would Like To Call My Robot

I would like to call my robot by name. When using Speech Recognition, "robot turn left" or "robot say hello" can I use another name instead, like "Sam say hello"?  Ron

Let Me Ask: How To Control And

Let me ask: how to control and program each servo when serial connection them on a port?

:(Not Totally Sure But I May H

:(Not totally sure but I may have burned out the first i2c port 1 below the camera port, I accidentally touched the first pin there with the negative wire from a digital port in the bottom left corner and there was a burn smell I quickly disconnected the battery and all seems to be working with the EZ4 ( I had a flashback from 2 years ago where I...