Robot Building Questions

Sizeof Array

Does anyone know if its possible and how to recreate the Sizeof command from Arduino processing in EZ-Script. I am trying to port some code to EZ-Script but not quite sure how to accomplish this. Arduino Sizeof command Here is what I am really trying to port: Lets say you have a array of values: int sequence[] = {0, 2, 4, 6, 8, 10, 9, 7, 5, 3, 1};...

Repeatwhite - Bug Found

Found a little bug, in the scripting. You know how it will try to help you auto populate a command, for example start typing "Repeat"....in the list that comes down you'll find "RepeatWhite" but not RepeatWhile....which I assume is a typo. EndRepeatWhile is correct, btw.

Need Help Programming C++ Interface

need help programming a c++ interface for yarp so that I can give my robot the ability to learn would gladly make available to the community have tested with arduino and works perfectly if interested let me know have other modules I can give also need help printing the head in abs willing to pay

A Homemade Power Distribution Solution

I decided that I needed to divide my power input up a bit. I have some servos that can only handle 5 volts and some that can handle 6. Most of the ones that will be running together handle 6. I decided to find a way to build a power distribution center for the 6V side. I found a board at RadioShack (cant stand that place) that worked perfectly. It...

Noisy Analog Dat On The V4

I have about 5 adc units of noise on my 256 adc analog inputs. Also the battery voltage and cpu temperature are noisy. I have checked my incoming battery voltage and it is steady. I tried to filter the analog inputs but no luck there. Thanks oops I guess I can not go back and fix my typo in the title.

Wall Wart Power

Hi there all, My ez b is here. Yeah Whilst testing I was just wondering if I could use a wall wart to power the ez b to save my batteries? The one that I have in mind is Input 100 -240V 50/60Hz0 15A Output 7V 42A Before I go and blow up my beloved ez b I thought I would check with my peers on the forum Thanks guys and girls

Question About Servos

Ok, I don't really know how to word this question. I re-built my Sunshine robot. Her arms and shoulders were very weak. so, I replaced the servos with ones that are very strong. I setup the robots, I thought to the right positions. When It came time to test her, I started with her right shoulder. It seemed to work Strong, but, it did not go into...