Robot Building Questions

Upgrading From Win 10 To Win 11 For ARC Pro On SBC

,  I am running ARC Pro on a single board computer (SBC) mounted directly on my robot. It's a dedicated computer and only runs ARC for the robot. My operating system is Windows 10. I have done all the performance tips and removed a lot of unneeded bloatware with info given here on the forum. Mostly to make sure nothing is running but what is needed...

How Can I Use Python Script To Return Values From A Mic Array?

How can I use a Python script to return values from a respeaker mic array connected to my windows SCB that is running ARC? I have python scripts that can return sound direction that I would like to use to trigger movements.  I have the latest Python installed on the window 11 pro PC that also runs the ARC application. Is there anything else I need...

Is This The Proper Way To Toggle Between Two Functions In A Javascript Loop?

, I have a Javascript that watched an ADC value attached to a microswitch. When the switch is operated the ADC value will change. I've written a JavaScript with two functions. One for each positions of the switch and a "While" loop in each that holds the script until the ADC value crosses a threshold. Then when one function finishes it...

Servo Range Extended

hi the horizontal servo window goes from 1 to 180 degree . i have a servo that has a 1 to 220 degree so i cant use the horizontal servo window . would it work in a script excample servoRandom(d0,1,220) ?  thank you

Connecting To Arduino Using A Script

How would you use a script to connect to an Arduino that is connected to your SCB that is running ARC? As part of the robots initialization I would like to connect to all the the Arduino’s programmatically.

Init Script

How would I write an init script that would allow me to set the min and max and speed before it moves a servo to its starting position?  I want to be able to have the robot move slowly when it initializes each servo.   I also want to be able to initialize each servo individually so I can keep the current draw to a minimum.    After the...

Need Tip On Javascript Counter Script

, I need a little help with Javascript.  * I have a working script that moves an arm motor up and down on an arc. * There is a opto switch in the center of the arc that that when blocked indicates that the arm is centered. * This opto switch is attached to an ADC port on an EZB v4.  * The motor is controlled with a Kangroo/Sabertooth and commanded...

Voltage Regulator Getting Very Hot

hi i hope i can ask this question here . i use the HITEC 6 volt big servo's for the inmoove . i notest the regulators getting very hot very rapidly .  can i use the 6volt servo's with the 7.4 volt batterie without the 5 voltinline regulator ? thanks

Robot Video Display Face

does Arc have a robot skill to create an a robot animated face via a computer video display? if not, how would i create one?