General Topics
Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Recent Robot Skills
Exosphere
Remote telepresence and control for any robot - human-assisted autonomy, live audio/video, task marketplace to...
Autonomous AI
Autonomous AI for Synthiam ARC: conversational self-programming that interprets commands, generates code, and...
Picture In Picture
Picture-in-picture camera overlay: superimpose one camera onto another; configure source/destination,...
Featured
Control LewanSoul LX-16A servos via ARC: assign virtual ports, read positions, switch servo/continuous modes, and set motion speed/baud.
Featured
Finley robot with EZ-B v3: 12 servos, PING sonar, camera, grippers, built to pick up objects and integrate with Synthiam ARC for interactivity
general
Smart Servo Update Issue Warning
Hello, Synthiam Community, I've generally had positive experiences with smart servos from Waveshare and Feetech. However, I regret to inform you of some recent negative feedback that I encountered. This morning, I attempted to update the firmware on 22 of my servos from version 3.9 to 3.10 using the Feetech debugging tool (FT SCServo Debug...
2
422
Dave Schulpius |
general
EZ-B V4 Dongle Purpose?
Hello everyone, Has anyone noticed there is a dongle included in the new EZ-B v4 box? Could someone explain what its purpose is? Thank you!
5
700
Athena |
general
MG995 Servo Compatibility Issues
Hello everyone, For those of us using the MG995 servos, there's been a noticeable change to these units. The circuit board is now significantly larger and...
4
2 k
Nomad 6R |
general
Configuring Lattepanda In ARC
Hi, I have a LattePanda board integrated into my robot, and I am having trouble configuring its settings in the ARC Pro software. I can't seem to assign it a specific 'seat' or position within the software. Can someone please help me with this issue? Thank you!
2
624
Synthiam Suppo… |
general
EZ-B V4 Base Protective Covers
Hello everyone! I've created some covers for the EZ-B v4 base. These covers can be used whether the EZ-B v4 is installed or not and are designed to protect the...
8
2 k
Nomad 6R |
general
Battleflipper Restoration And Excitement
Hi everyone, BattleFlipper is ready for battle! I was able to restore all the settings successfully. I have ordered new remote controls because the ones I have now are damaged. The package came with two containers filled with a blue liquid; unfortunately, one was cracked and leaked onto the internal electronics. The kids are going to be excited!...
5
938
Nomad 6R |
general
HD Servo Top Cover Sourcing
Hi everyone, Has anyone ordered a top cover (or case) for an HD servo? If so, could you please share a link to where you purchased it from? Thank you!
4
799
Nomad 6R |
general
STL Files For Rolli Body?
Hi everyone, Does anyone know if there are existing STL files available for the Rolli body? Thanks!
4
818
Nomad 6R |
general
Insights From Stepper Servo Experience
Reflecting on my experience with the Stepper Servo Skill, I realized there were 41 pages of collaborative brainstorming between DJ and the...
1
2 k
Automation Man |
general
Seeking Donations For Robotics Education
Hello, Robot Builders, I recently met a retired teacher from the Netherlands who is interested in teaching children about EZ-Robotics. To support his initiative, as he is funding it himself, I've decided to offer my assistance. I've assembled some JD Humanoids using leftover parts I had available. You can see one of them in action here: YouTube...
0
861
general
Request For JD Head STL
Hello, Does anyone have a clean STL file of the front section of JD's head available? Thanks!
4
823
Nomad 6R |
general
Request For Iotiny Case STL
Hi everyone, Does anyone have the STL file for the IoTiny case? Thank you!
3
820
Nomad 6R |