PRO
afcorson
Australia
Asked
Hello, Any chance of obtaining the STL files for the robot bust in the image? I only need the parts below the head for my i2 InMoov head.
Touch Path
— Sketch paths with finger or mouse and set turn/move speeds; interactive, educational demo of timing-based, sensorless robot navigation and limits.
Try it →
@afcorson
the files have not bin released . you cant find them .
Not surprising.
@afcorson
yeach its a masterpiece . there are some similar heads to find on tingeverse or cult . you can use TC free and have a go , cutt and slice .
https://www.thingiverse.com/thing:616540
Will Huff made that robot for his business. It's one of the fantastic things he's made. I'm not sure if he's selling these or the design files. He might chime in if he sees this.
There's a lot of ways to reach Will. He has links and emails addresses all over. He's very pubic and I'm sure he won't mind you reaching out and asking. Here are a few places:
Here's his robot company website: https://getaheadinrobotics.com/
Here's his Linkedin page: https://www.linkedin.com/in/will-huff-29a85410/
Here's his vendor page on the B9 Robot Builders Club site: https://www.b9robotbuildersclub.com/pub/parts/B90227/index.html
@afcorson this whole project has been push back and back over the years (unfortunately). The good news is that the new simplified redesigned files (mechanically speaking) are finished. The bad news is I'm in the process of rebuilding my entire shop to accommodate the flood of incoming projects. The Alan files will be released first, with Alena (the robot you have above) coming later in the year(qtr4), I will make an announcement here when everything is ready to go. The timing is right with all the AI chatbot activity. Both robots are a great vessel for AI.
Thats great will. Let us know how we can help
I have come up with this base plate for my InMoov head. It does the job. Appreciate the info about Will Huff though.