Connection Diagnostic icon Connection Diagnostic — Diagnose EZ-B Wi-Fi connection issues with verbose EZ-B communication logging, ping tests, log export and diagnostic reports for Synthiam support. Try it →
Asked — Edited
2 Participants
Two 7.4 Volt 360 Servo Step Up To 48 Volt 1000 Watt Motors

Two 7.4 Volt 360 Servo Step Up To 48 Volt 1000 Watt Motors

Looking for recommendations on commercial fabrication of h-bridge for above. Burned up one electrical engineer (not literally) who tried to hook up ezb4 with 48v motor. Looking for someone who is honorable and wants a good day's work for a good days pay. Telemetry 100% complete, body 90% complete, mechanics 90% complete. Perferr performance contract will consider time and materials. Someone familiar with this system preferred?

Warmly, Greg [email protected]


ARC Pro

Upgrade to ARC Pro

Don't limit your robot's potential – subscribe to ARC Pro and transform it into a dynamic, intelligent machine.

#1  

That link does not work for me. Question, you are looking for someone to buy you the H bridge with that capacity? The EZR hookup is easy as per the tutorial.

https://synthiam.com/Support?id=70

Author Avatar
PRO
USA
#2  

You didn't mentioned the motor specs.

I'll guess you have Brushed motor max 48V and 1000W power.

cheap PWM controller: https://www.ebay.com/itm/6V-90V-15A-PWM-DC-Motor-Speed-Control-PWM-Controller-12V-24V-48V-64V-72V-1000W/173177078863

The maximum output power: 1000 W Max continuous output current: 15A For 48V x 15W = 720 W

you will need 1 controller and DPDT Relay and some fly back diodes to protect the controller.

The relay controls the direction. https://www.electroschematics.com/9601/dpdt-switch-relay/

If it works for one motor you can replicate the solution for each motor.

#3  

I'm sorry for the lack of detail. I believe the controller which you site has a manual speed control, I am attempting to operate this 13 foot robot from a remote network so there will be no one there to turn the rheostat. Truly, Greg