Wowwee MIP Movement Panel icon Wowwee MIP Movement Panel — UART-based EZ-B/ESP32 skill to control WowWee MIP, enabling ESP32-Cam camera support and flexible battery-powered integration. Try it →
Asked — Edited
Resolved Resolved by DJ Sures!
1 Participant

Uart Read Commands

Perhaps it's just me but the UART commands for reading data is in the manual but when I try to type it in it does not seen to work and where the command would show up kind of like intellisense they do not.

Any help would be appreciated.


ARC Pro

Upgrade to ARC Pro

ARC Pro is your passport to a world of endless possibilities in robot programming, waiting for you to explore.

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#1  

Have you loaded the Example Project for the UART included in ARC? That's the best way to get an example...


uartinit(0, 0, 9600)

uartWrite(0, 0, "Hello world!")
#2  

I have looked at the examples and writing works just fine but reading does not.

It shows nothing in the buffer.

I even used the example script. I am using two xbee units.

I verified my wiring and will try to verify the xbee units.

#3  

I got it working. Feel like slapping myself. I completely forgot the ground wiring. I was powering the one unit from the 5 volt of an arduino since that's all I had laying around to provide the 5 volts.

O well you live you learn.

Thanks.