DHT11 Temp & Humidity Sensor icon DHT11 Temp & Humidity Sensor — Read DHT11 temperature and humidity on Arduino (signal pin 4) using EZ-Genuino_DTH11_Uno firmware; exposes $Temp and $Humid variables. Try it →

ARC Pro

Upgrade to ARC Pro

With ARC Pro, your robot is not just a machine; it's your creative partner in the journey of technological exploration.

#1  

since the v3 camera uses a USB wireless connection, yes. just select it in ARC when its plugged into the PC.

Author Avatar
United Kingdom
LinkedIn Twitter Google+ YouTube
#2  

Just be aware that the V3 camera range will likely be lower than the V4's WiFi range. Also that the V4 has pass through voltage so if powering the camera from the EZ-B V4 you would require a 3.3v or 5v regulator (I believe the camera will work for either voltage).

Author Avatar
PRO
USA
#3  

Thats awsome.I wanted to make use of the wireless cameras I have from ezb3 kit with the new ezb4...Thank you again for your support.I truly appreciate having you guys for your technical skills and fas response.Great community!