Stream All The Video Sources — Stream video from any URI/protocol (RTMP, RTSP, HTTP, UDP, etc.) to a selected ARC camera device for real-time network feed playback. Try it →

Charel

Netherlands

Asked Jun 2023

4 Participants

I2C Problems, What Could It Be

Skip to comments Jump to end

Recently I got again I2C problems, EZ-B starts hanging even on a simple I2C write. Very frustrating.Checking all that changed, cabling. etc. Also, a new SW release could be the culprit. Has anybody experienced I2C issues since the latest release? (2023.06.09.00)

Jump to end

Upgrade to ARC Pro

Join the ARC Pro community and gain access to a wealth of resources and support, ensuring your robot's success.

Compare Pro Features View Subscription Plans

Charel

Netherlands

#9 Jun 2023

Found the culprit, one of the Arduino's wasn't responding, causing the EZ-B to freeze and kill the whole robot. Nasty but at least found the rootcause. I have tried a cabled EZ-B connection and a WIFI EZ-B connection, in both cases the EZ-B freezes. For now, I have commented out the I2C write command. Would have been nice if ARC just responded with an error/exception message instead of "hanging". Anyhow, it was not the ARC SW release.