All Community Content

Struggling With Pwms

Hello, I have a new computer running windows 8.1 with Microsoft Bluetooth built in. I have a few issues with the PWM sliders that has my project, just about dead in the water. 1. My PWM sliders somewhat control my outputs (leds at this time) but when I run the script the outputs do not do anything. Although on my PWM on screen slider controls, I...

Script Eval

Ok, so I've finally found Rich's and others script examples and come to understand that the cloud has repositories but is only available through the ez-b gui. So, I've been doing some scripting, cutting and pasting. I need a little evaluation and assistance. First off. My goal is for the robot to wake up on specific days and times (that hopefully I...

Another Wireless Camera Thread, Updated Driver Link?

Sorry gang I know this has been talked about before and I've done all I can to research before asking but I'm stuck. I've tried everything I know to get the wireless camera working (This is the one from the kit) I downloaded some drivers from the web, downloaded drivers from a post from Rich, tried repeatedly to change the registry id; all to no...

2 Omnibot 2000 Robots On Ebay

Just giving a heads up. There are 2 Omnibot 2000 robots on Ebay at this time. Just thought I would let you all know if you are seeking a robot for a project :-}

Does The Ez-B V3 Work On The Mobial Eapp And When Will The Software Come Out For

hey guys does the ez-b v3 work on the mobile app? and when will the software come out for ios?

Question On Ezb-4

I believe I remember that you said while the EZB3 had pull up resistors, the EZB4 will not. Are you going to make some sort of shield that we won't have to worry about it blowing up our sensors? I remember when i built the LEAF robot, I hooked all of the sensors up and blew every single one of them before I realized they needed to have a...

Ez-B V4 Servo

hey guys I used to have a ez-b v3 and all the servos where programed to it I put all the servos on my v4 ports just the same as the v3 ports and when I try to move a servo nothing happens confused