All Community Content
Unleash your robot's full potential with the cutting-edge features and intuitive programming offered by Synthiam ARC Pro.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add Remote telepresence to control any robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
I Make Robots Crew Socks
Exclusive to robot builders, these are a one-size-fits-all solution up to a men's size 12. The construction is 73%...
Recent Robot Skills
SSC-32 Servo Control…
Bridge ARC to Lynxmotion SSC-32: maps V0-V31 to SSC-32 channels for reliable, high-performance serial control...
Servo Recorder
Record and replay named servo movements with adjustable speed/direction (-5 to +5), multiple recordings,...
Openai Chatgpt
ChatGPT conversational AI for ARC robots-configurable personality, memory, image description, script...
Featured
Overhead camera tracks a glyph to give precise robot pose to ARC's NMS for multi-camera indoor/outdoor navigation and waypoint control
Featured
Large EZ-Robot hexapod built with 3D-printed STL files, EZ-B v4 controller, heavy-duty CYS S8218 servos, ready for DIY printing and assembly.
question
Advice On Using Release() Command
I have a general question regarding the Release() script command. What I would like to do is to add this to some of my scripts after a Sleep() duration command to release some of my servos to save on any unnecessary servo holding strain and also to save on battery power. But I read in a post somewhere recently (can't find the thread I saw it in at...
20
5 k
Steve S |
question
New Robot Kit Being Released Today By Meccano
Maybe DJ can set up the motion capture with EZ-B. Take a look at this video. https://www.youtube.com/watch?v=Q03nIupGAIQ
11
5 k
thetechguru |
question
Ezb4 6 Pin Camera Extension
I have read the threads concerning the EZ3 camera and extending or adding to it and I have seen threads on making an extension for the 6 pin 2.0mm JST connector on...
9
3 k
Hal |
robot
Minxyup's I Want To Build A Larger Versi
Build a larger JD robot by pairing servos per limb, add arm linear extensions and leg blocks to reach countertops and increase height.
0
2 k
Minxyup |
robot
Derekg's I Want To Make An Autonimous R
Autonomous robot that seeks sun to solar-charge, senses people to hide like an insect, and measures how long it can survive.
0
2 k
DerekG |
robot
Tim's I'll Be Building A Robot For R
Robot that picks up Roomba/iRobot, carries it up stairs or to other locations and restarts cleaning, extending coverage without buying extras.
0
2 k
Tim Brian |
robot
Troy's Meet Pinhead!
Concept model scale mismatch: stacked components and an overly long neck.
288
28 k
Troy |
question
Send Serial Command Question
ok I am sure its an easy .. fix and I cant see it.. but here it goes I have the ramp script running for my sabertooth on D7 and it works great ( thanks Rich) However, I have my R2's dome going to a syren 10 that is hooked to D8 and I am having difficulty getting it to work... I have the movement panel used up for the sabertooth... I thought I could...
9
3 k
Jayutmb |
question
Pride Jet-3 Robot Project Battery Charger Question.
Greetings Everyone, So I'm building my first robot using an EZ-Robot EZ-B, a Sabertooth 60 X 60 Motor controller, and a Pride Jet-3 Powered Wheelchair as the base. Got all my parts together, just have a question about the battery charger. The chair has a Pride 2904-24 24 volt Automatic 3-stage on-board battery charger. I have removed the joystick...
3
4 k
Slowpoke |
question
Hb-25 Ramping
I need some help on something. I have two Parallax HB-25 motor controllers. I have been working on getting them to start and stop smoother. They right now are jerky in starting and stopping. I contacted Parallax customer service with my problem. I am using an EZ-Bv4 microcontroller to drive the HBs. Here is my question and answer from Parallax: I...
3
3 k
Ellis |
release
Android/Windows Release 2015.01.18.00
Synthiam ARC EZ-Builder update: easier JD assembly, EZ-Bit sync, mobile slider fix, safer ultrasonic defaults, improved mobile editor & 3D lighting
1
4 k
jdebay |
question
Bug Report - Sound Servo Ezb Log Error (And Joystick Log Error)
I have been working on an example of using Sound Server EZB and script to blink an LED when my robot talks. Every time the Sound Servo EZB object does anything or I interact with it, the debug log shows this error over and over again: 1/18/2015 8:54 AM - Sound Servo Error: Object is currently in use elsewhere. 1/18/2015 8:54 AM - Sound Servo Error:...
10
4 k
DJ Sures |