All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Bluetooth control for UBTech Alpha1 servos via ARC: map Vx to servo IDs, enable servos, and integrate with ARC movement & LEDs.
Featured
DIY Wall-E robot with 12-14 servos, camera, ultrasonic sensor, MP3 trigger, amplifier, laser diode, VU meter mouth and voltage bar.
question
Wifi Connection Question
I am doing a Pandorabot and a camera for a rover robot that i want to have video and AI. Eventually, I want to be able to video inside my house when away and keep the puppies in check. So the pandorabot and speech recognition worked fine but my camera didn't work. I then i realized that the ez robot program running on the Tosh L75 laptop was not...
9
4 k
twdodson67 |
question
Feature Request - Support Rtsp Video Stream
@DJ, If you have been following the recent threads on Foscam cameras, you may have seen that I am looking for a way to potentially get better performance from the Foscam's by using VLC or ffmpeg to transcode the H.264 RTSP stream to MJPEG in real time (rather than using the jpeg stream in ARC, which has a good bit of lag, so is not useful for...
8
4 k
thetechguru |
question
Getting This Error When Opening Ezb Project
Can someone tell me why I get this message when I open my EZB project? Thanks in advance.
14
3 k
CochranRobotic… |
question
C# Sdk Vs Emgucv
Hi everyone, I'm trying to write a GUI in c# that obtains information from a USB webcam. Since I 've got a ezb4 no so long ago, I'm aware what the sdk can do in terms of image processing and object recognition. But I'm contemplating between should I use sdk or emguCV to do my project on. So what do you guys recommen? (my project described below)...
30
7 k
DJ Sures |
question
List Of Updates
Just wondering if anyone has compiled a list of the ARC updates for 2016 that they would be willing to share? Thought I'd ask first before doing it myself.
12
4 k
fxrtst |
question
Robot Birthday Cake
Here is the incredible Dewey Robot Drone one from the movie Silent Running cake made by my talented brother in law for my sixtieth birthday!
8
4 k
Dave Schulpius |
question
Walabot Sensor
Anyone on this forum use the Walabot Sensor for distance measuring?
2
3 k
69developer |
question
Adding Multiple Motor Controls
Afternoon All I'm finally getting back to my project after many months. I searched the forum on my question but I thought I would post here so I'd have the most...
26
5 k
fxrtst |
blog
INNOVATORS - Worlds First Robotics And Innovations Retail Store
Innovators Store offers ezrobot products in Dubai as the world's first Robotics and...
0
689
question
Ez-Robot Jd Kit Charger Error - 300Mv Difference Of Voltage
I used the JD as usual until EZB battery low warning. When charging the charger lights blinks six times and stops 1 second, that it repeats the same sequence. In the manual they mention the cause as: Quote: There is a 300mv difference of voltage between battery pack. I waited 1 hour and i got the same error, what should i do ?
3
5 k
DJ Sures |
question
Spotmini
All electric, 65lbs/30Kgs, 90 minutes they demo the robot inside a house cool tech
2
3 k
Mickey666Maus |
question
Question: Using Dht11 Humidity & Temperature Sensor
Hello everyone, I am a newbie in this community, and just joined in the last month. It is a honor to start a conversation here in the forum. Currently, I am trying to integrate DHT11 into my robot. I am not very sure about how to apply this single-wire two-way serial interface with ezb v4. Could everyone please share his/her knowledge about this...
8
5 k
Rich |