All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Control up to 127 stepper motors via Arduinos mapped to ARC servos; supports any stepper driver, serial network, home calibration, speed/accel.
Featured
Mini Six EZ Robot with EZB3, micro servos and custom aluminum brackets - compact DIY build with Bluetooth speaker audio and room for upgrades
question
Continuous Servo Calibration Or Hbridge Question?
Edited Original Post: Good Afternoon, I am trying to get a Roli to work for a school club and after spending the majority...
15
3 k
Jeremie |
robot
Stiko's Henry The Enchanted Tree
Bring an Enchanted Tree puppet to life with 3D-printed parts and an E-Z-B V4 camera to animate arms, mouth and eyes.
3
4 k
DJ Sures |
blog
Ez-Robot Visits The University Of Calgary Lego Kids
Lego Mindstorms robotics school inspires kids as Wall-E AR with VR visits hosted by Rachael L'Orsa, sparking future...
5
3 k
fxrtst |
question
Creating A Sort Of Ez Robot Taskmaster
Hello! I am trying to make something I can "use" not just for fun but to actually accomplish stuff around the house over WiFi. Here...
3
2 k
faengelm |
question
New Arm Mod Jd
would this be a good idea to ad a servo more to the arm jd. original the arm is 15 cm long,with this mod it is 18 long. so a dummy servo would be good,between the legs and body. some kinda case for the two servo 's to put in. picture of dummy servo's video
2
4 k
Nomad 6R |
question
Charging Jd With A Rc Hobby Charger
Hi! Do I need to purchase the EZ robot charger to charge JD or is there a way to charge JD with an RC batter charger without taking JD apart or...
9
3 k
Zap Brannigan |
question
New Products
Hello DJ, Any updates and approximate dates for the release of new products? Ron
5
4 k
rbonari |
question
Onemorequestion About Power Supply
OK, the way I do it is to have 12V and 6 volt and 5 volt power sources. I start with my batteries which are two 12V lead Acid 9ah batteries wired in Parallel. I use the 12Vfor the motors, the 6V for the servos and the 5V for the signal sensors, etc. Then I hook all the grounds together and pull a positive wire off of each. I run the plus wire to...
0
3 k
MovieMaker |
question
Sabertooth Motor Driver On Ez Robot Controller; Using Wheelchair Motors
Hello all, I’ve been following some threads on people who are using the...
9
4 k
DJ Sures |
question
The Alternate Power Adapter Is Not Fitting In With The Power Shell
I got this product for my birthday a few years ago and still haven't been able to fit the Alternate Power Adapter into the Power Shell. I need help! confused wat?
5
2 k
DJ Sures |
question
Save Blockly Code To Ez-Cloud
I have successfully saved a project to EZ-Cloud, but it does not save a Blockly program I wrote. It seems the Blockly code is only saved locally. That limits...
5
2 k
NBCCSJ |
question
Serial
what if I wanted to control ten of those cheap dynamixel copies.(16A) and hook them all up in a serial fashion. Would I have enough serial ports on the EZB-4? I would have to assign an ID. The way they are setup, it looks like I could control them off of a single serial port. Suggestions?
6
3 k
MovieMaker |