All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Kinect Body Control
Control robot servos with Microsoft Xbox 360 Kinect body tracking; map joints to upper/lower body...
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
Featured
Legacy iRobot Discovery and 4xxx control via EZB software-serial (D0), supports Arduino/EZ-Robot, adjustable baud rate; not for hardware UART/USB
Featured
EZ-Builder Emotion script: speech-activated happy/sad/angry/tired responses with Personality Generator and RGB Animator; JD Revolution compatible.
question
Desktop Displays
Hi, I have two displays connected to my computer. Can I have Desktop1 on one display and Desktop2 on another? I want to be able to have the video player on full screen in Desktop2 while still been able to have Desktop1 on the other screen.
10
3 k
kazpet |
question
Sam Inmoov Finger Sensor Made Easy
Problem: 1. Current finger sensors require to many moving parts to make 2. Personal problem is I know very little about programing but I am learning...
6
4 k
DJ Sures |
robot
-634767667799482421.jpg)
Sfoy's My Frankenbot - Robosapien, Hearoid, Ottobot Head
Build a custom hearoid omni bot base with mini-ITX, acrylic enclosure, IR sensors, cameras, pan/tilt, EZ-B...
198
24 k
jstarne1 |
question
Wow Wee Rovio 2008 Tear Down , What’S Inside? :)
Let’s go
0
3 k
jstarne1 |
question
Sam Inmoov Build Starting Oct 2018
This is a build of the Inmoov robot. I will be moving at the speed of my 3D printer and life. I humbly hope to improve upon the great work that has...
3
2 k
Dave Schulpius |
question
Jd Robot Servo Question
My JD Robot's servos start to buzz (and sometimes smoke) whenever I attempt to calibrate it. I later found out that I'm supposed to manually tune the servos if they require more than 10 degrees of fine tune. I watched all the tutorials in the past, but clearly forgot some important information. My servos require more than 100 degrees of tuning....
2
2 k
Aqua |
question
Drd Parts
DJ, What are the rough dimensions on the DRD parts you recently uploaded?
10
3 k
jstarne1 |
question
Anyone Around Pasedena For Hackaday Super Conference Nov 2Nd?
Anybody out there ? I will probably be going to Hackaday Super conference and bringing a demo of my project for the hackaday challenge and I believe they announce the winners then too.
2
3 k
jstarne1 |
question
Tts Voice
Hi all, I'm new to this robot stuff and having alot of fun with it, but looking for info. I want to try if my robot can speak Dutch. So I've started to look for info and found Ivona - Ruben as a voice. Can anyone confirm that Ivona voices are working on the latest build of ARC and Windows 10 64 bit?
0
2 k
ExSerCo |
question
Robot Currently Operates By Time - What Would Be A Good Upgrade?
Hello there I am part of a robotics team. every year we get avrious challenges and travel to a competition. the challenge in the competition changes each year. last year we had to pick up milk crates and put them into various places. when the round starts, there were 15 seconds on which the robot drives autonomosly, and 2 minutes after that was...
1
2 k
DJ Sures |
robot
Jeremie's Fridgebot
Magnetic fridge-clinging robot using IoTiny, magnets and microservos for climbing, surveillance, whiteboard cleaning and duct/pipe inspection.
49
7 k
Jeremie |
question
Another Dynamixel Servo Plugin Request
Robots (Mfg. of Dynamixl servos) has released their "TurtleBot 3" kits. "TurtleBot3 is a small, affordable, programmable, ROS-based mobile robot for use in education, research, hobby, and product prototyping." (From Robotics) These kits include a Robotics OpenCR board to control the servos, a Raspberry Pi (with camera) as...
4
2 k
OldBotBuilder |