All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Kinect Body Control
Control robot servos with Microsoft Xbox 360 Kinect body tracking; map joints to upper/lower body...
Inverse Kinematic Ar…
Control robot arms with inverse and forward kinematics, converting X/Y/Z positions into joint motion...
Featured
Example NMS Level #1 navigation skill showing subscription to combined scan+location data, displaying position and scan info; source code included.
Featured
16 Hitec HSR-8498NB servos on dual external boards plus a 17th camera servo; 0.38A @6V draw, 1500mAh NiMH per foot and EZB aux power.
question
Use Webcam With Ez-B V4
I'm intending to use this conversion circuit to integratethe camera with ez_b, hopefully everyone can give me an advice before I buy it. USB UART switch CP2102 uses CP2102...
3
2 k
ptp |
robot
Toymaker's My Alexa (Alive)
Give Alexa a pretty face: see what it's like to add a visual, human-like face to Alexa.
10
4 k
RoboHappy |
question
Hitec D845WP Servos Can't Move Slow And Smooth
I'm testing a new robot , using ezbv4 and hitec D845WP servos with lipo 7,4 V batteries. (I never used these servos and such high-current batteries before). These servos are very quick, expecially with lipo batteries. So, when I program an action, I can't get a smooth and and slow movement, no matter how I set delay, step and speed in the action...
9
4 k
Dave Schulpius |
question
Strange Issue With Servo Speed/Delay/Steps And Usb Camera
Hi everyone, I have been following you for some time and first of all I wanted to thank this forum and the...
14
3 k
DJ Sures |
release
ARC Raspberry Pi 2019.04.11.00
Auto position movement panel lets you set variable speed modifiers per frame in an action; double-click a frame to edit and enable speed values.
0
3 k
release
Beta Release 2019.04.11.00
Auto position movement panel enables variable speed modifiers for all frames in an action - double-click a frame to edit and enable speed values
0
3 k
question
Getvoltage - Object Reference Not Set
Can anyone tell me why GetVoltage() in a script gives me the error "Object reference not set to an instance of an object" ? Regards BAW
2
2 k
baw |
release
ARC Raspberry Pi 2019.04.09.00
Beta fixes: board ID required for GetBatteryVoltage/GetCPUTemperature, IMU gyro in deg/s, movement speed events and auto-position speed fixed.
0
3 k
release
Beta Release 2019.04.09.00
GetBatteryVoltage/GetCPUTemperature now require board ID (GetVoltage(0)); IMU gyro in /s; movement speed events and auto-position speed fixed
0
3 k
live hack
Hacking Robotis Opencm 9.04 With Bioloid
Program OpenCM 9.04 with EZ-Builder to control Dynamixel Bioloid servos via USB using the Arduino OpenCM library and EZ-Builder's Dynamixel...
6
5 k
Mickey666Maus |
question
Inmoov Kinect Function
Hi, I'm diving into InMoov and have thus far just been printing parts with abandon while I finish researching everything else. I have totally decided to go with EZ-Robot rather than MRL for obvious reasons, but I have found conflicting information about whether I can use the Kinect with EZR. Beyond whether I can use it or not, I'm a little...
2
3 k
Perry_S |
question
Rc Lawnmower
These Rc lawnmowers caught my attention, So i purchased a spectrum DXE remote controler with reciever, also purchased a 2x32 sabertooth drive. I have a key start mower, just don’t know what othe components i need to start my mower from the controller any help please?
8
3 k
DJ Sures |