Robot Building Questions

Operating System Question

Can EZB run under Linux? I am thinking about a mini single board on my robot to make it automonius (excuse the spelling) and have speak ect on board rather than coming from my desktop. The Strawberry PI runs a version of Linux and is quite inexpensive. Thoughts? jms

Servo Speed Control

Having problems with speed control and couple other questions some one may have answers to. 1. EzB_Connect1.EZB.Servo.SetServoSpeed(Servo.ServoPortEnum.D3, 90). Does 90 mean 90% of power. If so it is very slow. I notice that in the Servo Speed Control it uses 0-9. The lower seems to be the faster speed. Do I use 0-9 for the VB command? 2. How do I...

Contolling The Bioloid Cm-5 Controller

How can I use the ez -B to send commands to the Bioloid CM-5 controller. Thanks

Yarp Port

implimented ezb to yarp need image matrix to get salience and advance object recognition and various other ports to get it the ability to get complex stuff and off load other things to multiple computers

Anyone Available To Do Ez-Script Scripting Examples ?

Friday, 1 February 2013 Good Morning Fellow EZ-Robot Scripters ! Is anyone available to colaborate on EZ-Scrpts and write simple Test Code Examples to become familar with Using the EZ-Script Instruction Set ? Hopefully, we can do it by this Forum, if that is permitted, or Phone, or Skype, etc. Thank You & Best Wishes From Phoenix,...

Ez-B Does Not Power Up.

if i connect power to the ez-b the leds don't light up. yesterday i had the same issue, and fiddled around a bit thinking there might be a loose connection. Randomly it did power up, but today i cant get it to work anymore. What could be the problem here, i cant see any obvious disconnections, how should i diagnose?

Update Checking From Ez-Script

Is there any way to check or a software update from within EZ-Script? I would love to have my bot tell me.... "Master Wayne, the Great Maker has updated my software." I guess I would like my bot to check daily so as not to put too much pressure on the website... and if I really wanted to get carried away then my Bot could downloaded and...

Ez-Sdk Compatability

Is EZ-SDK compatible with Microsoft Visual Studio 2005? Thanks

Roomba Movement Panel

Anyone have any ideas on how to reconfig the Roomba Movement Panel to use a different port (i.e. D1)? I had a rather unfortunate incident with D0... and let's just say D0 is no longer an option, lol Thanks!

Joystick Control

Hi All. As far as I can tell, the joystick control is all-or-none movement. Is there a way to make it such that a small movement of the stick translates to a slow movement of the wheels (and a progressively larger deviation of the stick produces a faster wheel rotation)? I'm using a sabertooth H bridge, if that makes any difference. Also, is there...

Wild Thumper 6Wd

Hi, What motor controller should I use with the 6WD Wild Thumper platform? I bought the 2.5 amp H-bridge board but obviously that's is not going to cut it! There is a dedicated controller board (https://www.sparkfun.com/products/11057) but not sure how one would connect it to ez-robot board? Has anyone else connect one of these to the ez-robot...