Robot Building Questions
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Kinect Body Control
Control robot servos with Microsoft Xbox 360 Kinect body tracking; map joints to upper/lower body...
Featured
Train camera vision objects via controlcommand(), attach camera, start learning, monitor progress, and return object name for scripts.
Featured
EZ-Robot rover CP uses Sharper Image EVAC drivetrain with EZB V3, Chumby touchscreen, fan-cooled electronics, micro and HD servos, Bluetooth LED.
question
Synthiam With Adafruit Neopixel Mini
Dear Ez-Robot Profs :-) I found only extrem old threads for NeoPixel Leds. now NeoPixel is integraded in ARC Software but since two years.. no new...
10
3 k
Jeremie |
question
Inmoov And Synthiam
I have completed the printing of my inmoov robot. I was wanting to use ez-robot for my hardware and ARC . Will 1 ezb v4/2 be enough for the entire project or do I need 2? Also the...
9
4 k
nallycat |
question
Using An Rpi As A Ez-B
As in can a raspberry pi be used for the iOS instead of a ez-b board?
4
2 k
jmayes |
question
Ez-B V4 Not Connecting To Wifi
hi guys, i have a little problem with connecting the ez-b to my computer. My ez-b will not connect to my computer's wifi receiver, it is very strange because it...
26
3 k
Herbie53 |
question
Using Joystick With ARC Running On Remote Desktop Computer
I have a robot that is connected to the computer through WIFI1. This computer will have another WIFI 2 that will be used to connect the computer to network. I will be controlling this computer from another one (Master) using Remote Desktop App. I want to be able to control the movement of the robot using a joystick connected to the master...
2
3 k
DJ Sures |
question
Did You Miss Me?
Did you miss me? Have been out of the EZ-Robot/Synthiam loop for over a year, but I am back. I see DJ and company (and the community) has been busy adding support for lots of other products. Looks like I have a bit of catching up to do. First project is to get Inmoov (UNAS) ready for Halloween. I am thinking of going traditional and dressing him up...
3
2 k
rz90208 |
question
In Search Of Omnibot 2000
Hi every im looking for a omnibot 2000 without remote or even radio command hard ware for the insides of the torso. Just need the complete robot body,complete head,...
91
9 k
jstarne1 |
question
Ezbpi Server - Access To The Pi Gpios
Hi, I have successfully connected ARC to the Pi using the EZBPi server, but I don't understand how to access the GPIOs of the Pi. If I want to set...
24
5 k
fredebec |
question
Pimoroni Pan And Tilt HAT For Rpi 3 B+
hi i just purchased the pan tilt hat. i know it works because i tried the python examples. But how can i get ARC to recognize it? I do have the ez server installed on the rpi with a camera, it connects, i tried the camera control example and the video works. i added the vertical servo, tried to set it up as D0, D1 and D2. neither will control the...
37
5 k
ptp |
question
Botmatrix Youtube Channel
Hi Guys & Gals! I wanted to let you all know that after a long hiatus I'm spinning up my Youtube channel again! I'm shifting over to my new alias: Botmatrix. From...
56
8 k
Jeremie |
question
Low Profile Servo's
hi i am looking for low profile servo's ,strong ones and also afforteble. some 50 a 60 euro size 35 l x 15 w x 20 h.i am making the hip part, for jd turning waist.so i need a small...
0
2 k
Nomad 6R |
question
Experiencing Problems With Website
I am having troubles accessing anything but 'questions'. If i try anything else i.e 'App' or 'Robots'...I get an error.....any idea when this might be...
14
2 k
DJ Sures |