Hello EZ Robot! Meet Dusty, he is a omnibot torso and I currently have the choice of robbie at head or a omnibot done where you can see inside. He will handle a few basic functions and us made more simple than his big brother Jarvis.
- He can vacuum (which is loud) with power brush and impeller
- He can "sweep" nearly silent by running the power brush at a reduced voltage and a small DC blower providing low level auction. 3.dusty will have two germicidal bulbs ,.one facing downward to the floor and another behind intake fans that not only cool electronics but it pulls air through a Honeywell two stage carbon filter. 4.dusty has 4 build in filters foam pre filter , and 3 carbon filters.
- He will have a camera on pan tilt bracket. He will be controlled by Bluetooth or wifi.
- Long runtime , 2 x 12v 7ah batteries.
Any other suggestions guys?
]
By jstarne1
— Last update
Other robots from Synthiam community
Rgordon's Project Questor
Introducing Questor. I put a hold on my large robot project Magnus awhile back due to budget and time constraints. I...
Budel0's R.O.O.S.T.E.R.
Hello fellow EZ-Brs, As I finally discovery how to upload photos I thought it was time to share my robot with the world....
Redzone's Mo, My Inmoov
Im finished building my Inmoov, Mo. Finely! Almost, waiting for a new EZB4 to power Inmoovs head. Still have lots more...
@jstarne1 inside the actual body, perhaps around the neck... like downward facing White LED's to highlight all the robo-guts when looking down through the dome. Somehow park the EZ-B in clear view, along with all the wiring and servos, etc. Ya know, ideas just to make you work as hard fixing up the inside as you do the outside
I could do etched plexiglass floating mounts for the electronics. My only concern is to not make it so bright it reflects off the inside of the dome preventing the camera from seeing out. As long as dusty can see then it sounds cool. I'll draw up a idea or two and post it , you tell me what you think.
Im sick today so no working on robots. Good news though! The 340mm servo ext wires came in which are needed for both projects to hookup sensors , hbridge, and servos =)I like the name "Dusty" I think it suits him!
Thanks brett , i named him after a smaller tomy robot that vacuums your desk named dusty.
Cute little guyOmnibot dome came in!
Josh, Hope you are better soon. I had a question to ask about the wires that you got in. Are they heavy duty (not cheap and flimsy like the ones I ordered.) Where did you get them? I got mine off of Ebay. They were the cheapest ones. I got like a hundred for $10 with shipping. Not worth it , though.
Ok so I dug up some new speaker grills to cover the fan holes. I will cut the hole later . I Just get bored being sick.