Hello EZ Robot! Meet Dusty, he is a omnibot torso and I currently have the choice of robbie at head or a omnibot done where you can see inside. He will handle a few basic functions and us made more simple than his big brother Jarvis.
- He can vacuum (which is loud) with power brush and impeller
- He can "sweep" nearly silent by running the power brush at a reduced voltage and a small DC blower providing low level auction. 3.dusty will have two germicidal bulbs ,.one facing downward to the floor and another behind intake fans that not only cool electronics but it pulls air through a Honeywell two stage carbon filter. 4.dusty has 4 build in filters foam pre filter , and 3 carbon filters.
- He will have a camera on pan tilt bracket. He will be controlled by Bluetooth or wifi.
- Long runtime , 2 x 12v 7ah batteries.
Any other suggestions guys?
]
By jstarne1
— Last update
Other robots from Synthiam community
Nomad's Using Robosapien V2
Customize V2 robot with EZ-B4: left shoulder camera synced to head rotation and right-side laser for shooting balloons;...
Jstarne1's Calling All 3D Printers! Get The Stls While They...
LEVi Rover 3D files assembled and ready to print, with model cuts for smaller beds and community tips for printing and...
Ezang's 6/9/2021 New Borg Robot - Combination Of My Robots
Combine Borg and crane robots with EZ-B4 controller, servos and strobe light; programmed with Synthiam ARC for voice...
here is another idea add a steam cleaner to one of your omnibots to make steam ,one way is to use heaters ,other thats better is a pelter element ,you apply 12 volts and one side is cold and the other is hot,you put the hot side under a small aluminium pan and on the cold side you add a small fan made a design just like it for work to calibrate digital thermometers ,hot and cold test baths
MY brain thinks every second for ideas
Because steam rises and the crazy amount of power consumed.... and steam does not mix with electronics that wont work.
that can be fixed,i do see a shark that makes one,and seen ones with electronics too on power ,using a pelter element it uses less current then heater coils
one way to get rid of steam is use a fan to blow it away from the electronics another is use a vacuum to pullthe steam in and recirculated it
I finally recieved the uv bulbs for dusty , it took three weeks to get just 6 bulbs , and these were coming from the same region. I didn't want to continue till I could get fitment tests and such.
I also ordered cathode tube versions that use a inverter like a flouresent light does. I will compare them but my money is on the one with an inverter. I will use a light intensity sensor to determine which is best but I must avoid looking at the lights as its the most dangerous type of uv , UVC
Cool! The toughest thing is waiting for parts.
What i do is work on another project while waiting on parts,china takes the longest but a lot cheaper
Thats why I have a few projects in rotation lol