Here is the first interesting video of my Hansi.
With working Head and Torso ( and of course with Neo Pixel Rings)
By rentaprinta
— Last update
Other robots from Synthiam community
DJ's The Real Wall-E
Wall-E using EZ-B and Synthiam ARC tracks faces, color and motion with camera, vertical head servo, voice control and...
DJ's Revolution. The History Of
Revolution modular robot platform expands EZ-Robot with EZ-B v3 controller, 3D-printed prototypes, tutorials and a...
Pacowang's Delta Vs Quad
Test quad vs delta bases for 100-240 lb rugged outdoor robots with GPS navigation and planned weatherproof electronics...
PS:
in meinem Profil steht auch meine Email.
Dann mussen wir nicht das Forum mit privat Gesprachen vollstopfen.
Boris
Boris,
Where did you get the spring for the neck from? I'm based in the UK, and have tried loads of places, including Ebay, but can't find one the correct size, regarding inner diameter and length.
Cheers, Chris.
Hello Cem,
i use two diffrent springs together to get a better result.
I bought this springs from here:
https://www.federnshop.com/de/produkte/druckfedern/vd-207s.html
and
https://www.federnshop.com/de/produkte/druckfedern/vd-145dh.html
I see its a german site, but you can choose also english and i think they also send to UK.
Have a look there, they have a good sortiment of springs!
But it takes some days for sending ;-) My last oder took 1 1/2 Weeks inside Germany.
Boris
Thanks Boris, I'll have a look at the Federnshop website.
Cheers, Chris.
Hello Boris,
Simply a great inmoov project, particularly the facial area. So I need to ask what 3d printer do you use?
Thank you,
Keep up the good work!
Walt
Hello Walt,
i use the Ultimaker 2, but the finish Product not comes directly out of the printer. A lot of handwork is needed to get such kind of print results.
I made a Tutorial where you can see, what work is it.
https://groups.google.com/forum/#!searchin/inmoov/pla/inmoov/a6z8a43DRmA/09L5B8eDtvoJ
Boris
awesome robot! its really impressive how you did the mouthwork. keep building!??
Hello dederdegamertag!
Thanx for the compliment!
Yes i am still at work!
For the mouthwork, i try in the moment a new idea, to source out the Talking servo App to a Board Soulution.
The idea to send the Audio Signal to the https://www.sparkfun.com/products/13116
and the Spectrum Shield send a signal to arduino who send a signal to a servo.
So then if everything work, the mouth move to every sound what come out of my loudspeaker.
Until today the talking servo make some problem. For example on a saying date, the talking servo stop to fast. The date is still saying, but the mouth is not moving anymore. And some other timing problem.
I will see if my idea will work.
If i have news i make a video update.