Robot Building Questions
Experience early access to the latest features and updates. You'll have everything that is needed to unleash your robot's potential.
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
"I build robots" Hoodie
This heavy hooded sweatshirt is perfect for robot builders. The material mix of cotton and polyester provides warmth...
Featured
Servo Recorder
Record and play back servo movements on your robot at specified speed and direction
Featured
RALPH
OK, so I am building an InMoov robot with Drupp neck. Nothing new there. However, I want it to be multi-lingual so I am expanding and...
question
Using Variables For TY2 And Camera
Hi, I may just be missing something, but how do you use variables in different skills together. As an example, If I wanted to make it so every time Tiny...
4
860
DJ Sures |
question
Need Option To Use An EZ-Board Other Than 0
Dj, I am using the new Brushless Motor Movement Panel, and I have a need for that control to be on my second of 3 EZ-robot controllers. My Lost in Space B9 robot has three different sections: EZ-robot 0 is the primary, with the network hub, and is used to control movement in the torso of my robot. EZ-robot 1 is used to control movement in the head...
2
2 k
DJ Sures |
question
Error Playing Sound Files
hi i downloaded the latest version ARC and now i cant play sound files ? also notest the window ezbv4 info is not showing ? also notest the auto position doesn work ?...
9
838
Nomad 6R |
question
Cant Connect To Rover
Hello, I have a problem, I cant connect to the wifi network of the Rover, Windows says that it was not possible to connect to the network. I use the tp-link TL-WN822N wifi usb...
12
2 k
morc101 |
question
Calibration Button
hi i see no button in the connection window to get on the web page to calibrate the servos ?
3
770
Nomad 6R |
question
Wifi Connection Problems
No matter what I do I can not connect the EZ-robot EZ-B v4 to wifi. I refuse to go Pro Sub. when I am only using one laptop. Would I have to redownload ARC again? Chris
5
719
Dave Schulpius |
question
Lumpy, Lets Compare Notes On Kangaroo X2 Please
Hey Lumpy (or anyone who can advise). Im addressing this first to Lumpy because I know he is using and working with the Kangaroo X2 / Sabertooth setup. If anyone has some insight please chime in. Anyway, as mentioned in other posts Im working through issues with my Kangaroo X2 / Sabertooth setup where Im using two DC motors that have pots for...
36
11 k
jsale |
question
SSC-32 And Virtual Ports
Is there any way of turning off a virtual port? I am using an SSC-32 for more ports and was hoping to use the PWM(V0,90) command to set the voltage value of a virtual port. But this command only works for digital ports. I want to connect some LEDs to the virtual ports and turn them on and off.
4
872
afcorson |
question
Playback Of Several Several Servo Recorder Recordings Disconnects EZB V4
Has anyone had this issue? When I play back three recording of six servos...
46
3 k
Dave Schulpius |
question
SSC-32U Pulse Width Modulation
A quick question. If have a couple of 270 degree servos. To get the full rotation I need to set the pulse width range in the SSC-32U configuration to 500-2500. Will this upset other standard 90 degree servos connected to the SSC-32U? The default range on the config was 650-2250, and I was only getting about 220 degrees rotation.
9
2 k
DJ Sures |
question
Movement Tracking Not Working
Hello, I have a n issue that I recently ran into and was wondering if anyone had any suggestions on how to fix it. Ive been working with my Revolution Roli robot...
10
972
TripleJ500 |
question
Problem With ARC Mobile App Latest Version
I just downloaded the latest version (v2021.05.20.00) of the mobile app to one of my tablets. None of my installed robot apps are appearing. They are still there in the ARC/My Projects directory but dont show up as installed. I downloaded a test project from the Cloud and it seems to store it somewhere else. Do you know what is going on here?
3
957
DJ Sures |