Robot Building Questions
Synthiam ARC Pro is a new tool that will help unleash your creativity with programming robots in just seconds!
Synthiam Credit
Your Synthiam Credit is $0.00
Discover ways you can lower the cost of Synthiam products by contributing to the platform and community.
Earn Synthiam Credit
Exosphere
Loading...
Add remote telepresence capabilities to your robot from your phone or PC
Add your robot to Exosphere
Sythiam Swag
Men's High-top Sneakers
Cyborg fashion sense has no limits! These extremely comfortable high-top canvas sneakers are made to last and to impress...
Featured
Tiny Yolo2
Object detection is fundemental to computer vision: Recognize what the objects are inside the robot camera and also where they are in the...
Featured
6/9/2021 New Borg robot - combination of my robots
Just for some fun, I am combining my two robots, the Borg robot and the crane robot. Used a strobe light and then filmed I used many pieces...
question
Issue Saving Project
When I add RPlidar skill I cannot save project. OK if I delete it Any ideas?
1
726
DJ Sures |
question
Remote Control Of Hard Wired EZB4
Is there a method of controlling a robot remotely which has an onboard PC with EZB4 connected via USB? All of my robots bar one, use WiFi connection and...
13
947
fxrtst |
question
Servo Buttons And Combo Box
I am finding the Servo Buttons and Combo Box are not consistent between the Mobile App and a PC. They actually work on the Mobile App perfectly whereas on a PC, the Combo Box activates a selection before it is clicked, whilst the Servo Buttons require the user to tap +- repeatedly. With the Mobile App, you just slide your finger left to right. Is...
4
635
Dave Schulpius |
question
My Camera Is Not Recognized As A Camera Device.
I bought the JD humanoid a few years ago and put it aside for at least 3years. I used ARC before. However, I try using ARC for connecting the humanoid recently but the camera is not recognized. Is there something I missed out? Thank you for your kind assistance
11
599
w10546ho |
question
Servo Wont Move Until Second Servo Moves First
Hi all, I have several EZBs in my robot with servos attached to the EZB on connection 2 in ARC. Ive got a weird issue I cant figure out with a servo attached to that EZBs D0 port. My problem servo is attached to port D0 with 5 other servos attached to other digital ports, D2 through D6 with D2 not being used. They all work fine except the one...
6
734
Dave Schulpius |
question
Help! I Cant Connect To My Camera On Client Mode
After I connected to my robot with client mode I tried to turn on the camera, but when I did the camera didnt turn on and I...
1
829
DJ Sures |
question
How To Store A Variable In Blockly
In conversation menu Im trying to get the person to answer yes or no, and that would go into a variable. After it is in variable if it is equal to yes...
17
848
DJ Sures |
question
Raspberry Pi GPIO With Windows 10
Hello everyone; Im curious regarding the use of on-board GPIO pins with regards to embedded PCs, such as the Raspberry Pi 3B I am using in my project that have ARC running on them. I am running ARC Teams on this Raspberry Pi to control other EZBs in the robot, and in order to shut the robot off properly, the Pi will need to send a shutdown signal...
1
754
DJ Sures |
question
Inmoov Multiple Servo. My Power Supply Will Not Power My Servos
I am going to try to configure this robot using the EZ-B V4. Im currently trying to power 6 servos for the right hand. The servos are MG996R, they require 6V. I purchase a power supply ( DROK 48V Power Supply, AC 110V/220V to DC 0-48V 10A 480W Buck Converter, Adjustable Variable LED Adapter Regulated 5V 12V 24V 30V 36V 48V Volt Voltage Transformer...
5
603
monterdur |
question
OK Can You Use A Raspberry PI Zero Webcam With ARC
My question is there a way to install a raspberry pi zero with a with a webcam on it and be able to connect to it with...
2
774
smiller29 |
question
My Robot Is Too Loud.
Hey! I was testing my speech recognition and my robot wont respond to robot stop. I know theres nothing wrong with the command because it recognized my speech when it was stationary but when its rolling it seems to not pick up my voice over its own motors. So how do I make them more quiet? Edit: I forgot to mention that Im using a head set with a...
3
578
lmrobot |
question
4-1 Sensor
Hi everyone, have fitted an Ez-Robot 4-1 Orientation Sensor, went to calibrate and it disconnects from wi-fi? Never saw any readings from the variable watcher, tried different i2c ports with no...
8
3 k
Jeremie |