Asked
JD Backpack Modifications For Durability
Hi everyone,
Does anyone still use the JD Backpack? I made some modifications to make it stronger. The four pins tend to break off easily, so I reoriented them sideways. Additionally, I pre-drilled the holes for the plate using a drill bit with a diameter of 1.5 mm, and I used screws with a thickness of 2.2 mm.
Here's an image of the modifications:
I also created a short video demonstrating these changes:
https://www.youtube.com/shorts/KsxuIMEW-nI
For those interested, here are the STL files for the modified lid and volume:
Lid STL
Volume STL
Forgot about this mod you did, Nomad. It’s pretty cool - I’m gonna have to try it someday
#DJ
thank you . the actully part is not my design i just modified it .
hi all
a little update . the backpack plate needed a accses hole to be able to reset ,
the ezbv4 without taking the plate off . here's how i did it .
short video .
https://www.youtube.com/shorts/cAyffE0qhg8
plate plateHOLE.stl