Firmware does not update via Bootloader, get the following error log
Warning: Line 2: Fixing Diff: 4 Warning: Line 710: Skipping Type: 4 Warning: Line 711: Impossible Diff: -11328 Address: 0x0, SB Size: 0x5880 Image OK
Set Digital
— Toggle a digital I/O port between TTL low (0V) and high (3.3V/5V) in ARC; select board and port, simple on/off control-signal only.
Try it →
Firmware does not update via Bootloader, get the following error log
Warning: Line 2: Fixing Diff: 4 Warning: Line 710: Skipping Type: 4 Warning: Line 711: Impossible Diff: -11328 Address: 0x0, SB Size: 0x5880 Image OK
Apparently the Toshiba bluetooth stack is not compatible with the file transfer process. Changed to another laptop (Lenovo) using Win 7 bluetooth stack and the upgrade to V16 was successful.
I had a similar problem. I got it solved by uninstalling all the EZ-B software and then do a completely, fresh new install. Everything worked right away.