Custom Servo Controller icon Custom Servo Controller — Control up to 99 servos over serial with Vx virtual ports using custom firmware on Arduino or microcontroller controllers. Try it →

ARC Pro

Upgrade to ARC Pro

Your robot can be more than a simple automated machine with the power of ARC Pro!

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#1  

You probably can get away with it. However, you might draw so much current that you won't be able to run any servos at the same time. Worst case scenario is you blow a fuse, really.

Is the Dlink IP cam compatible with ARC? Or are you not using it

#2  

Hello DJ

If I run a 7.2V 5000mah battery to the EZ-B will I be able to power the IP cam from the ez-b 5V output?

Thanks!

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#3  

You'll have to consult Mr Ohm for peripherals in addition to the camera

Worst thing that will happen is a blown fuse:)

#4  

Hello DJ

What is the max current output of the ez-b 5v regulator? I recall it saying 3.5A?

Thanks!