Kondo KRS ICS Servos icon Kondo KRS ICS Servos — Control Kondo KRS ICS2/3.5 servos via EZ-B UART; experimental, untested. Supports chaining, virtual servo ports, Release() and Servo() commands. Try it →
Asked — Edited
1 Participant

Bluetooth Requires Reset On Power Cycling Ez-B

I can connect to the EZ-B no problem, but I have to reseat my bluetooth adapter every time I power cycle the EZ-B. Any ideas? The wall-e I built has located the EZB in a very remote location. I am contemplating rerouting the 4 connection wires to the outside of the robot case so I can do this remotely, but that is a bit hack.. Are there any easy solutions for this? I am finishing the xmas present for tonight lol (its a bit tight on time)..

Thanks and Merry Xmas !


ARC Pro

Upgrade to ARC Pro

Discover the limitless potential of robot programming with Synthiam ARC Pro – where innovation and creativity meet seamlessly.

Author Avatar
PRO
Synthiam
LinkedIn Thingiverse Twitter YouTube GitHub
#1  

If the bluetooth adapter does not power up with the EZ-B, then your batteries are low. I experience that issue often also. I feel the real solution for us is to start using a 6 cell AA battery pack - instead of 5 AA.

Servos are power hungry!