Comm Expansion Configuration icon Comm Expansion Configuration — Configure EZ-B v4/2 Comm Expansion: switch between UART transparent proxy and USB direct PC link (avoids WiFi); EZ-B needs separate power. Try it →
Asked — Edited
2 Participants

So I Am About To Buy Another L

So I am about to buy another lipo battery for the EZ VB4, the one I was using for my EZ BV4 was a 7.4V, 1300mAh and I was wondering if it is safe to use a 11.1V, 1300mAh. I have read a few threads in this community but I just felt safer in asking if someone has used the 11.1V and has not had any issues burning anything. 


ARC Pro

Upgrade to ARC Pro

Unlock the true power of automation and robotics by becoming a proud subscriber of Synthiam ARC Pro.

Author Avatar
PRO
Canada
LinkedIn Thingiverse Twitter YouTube TikTok
#1  

Yes, you are ok to use an 11.1V battery with the EZ-Bv4 

Please Note Be aware that the voltage you supply is what is outputed on the Digital pin power rails so you can only hook up servos and sensors that can either use 11.1V or have a regulator to drop that voltage down.

#3  

Great!! this helps a lot, thanks for the input.