All Community Content
Synthiam Credit
Earn Credit
Contribute to the community and earn credit to lower the cost of Synthiam robotics products and subscriptions.
Recent Robot Skills
NMS Navigation Data …
Query NMS lidar scan data by angle, with control commands for range, arc extremes, and obstacle...
Rplidar
Slamtec Lidar driver for ARC; scans 360° and publishes distance data to NMS for mapping, obstacle...
Kinect Xbox 360 Dept…
Converts Xbox 360 Kinect depth frames into NMS obstacle scans for ARC path planning, SLAM, and...
Featured
Standalone autonomous navigation using Beitian BN-880 GPS/Compass with real-time map waypointing and offline map caching; requires Arduino.
Featured
Robot build with working drive system and ongoing fabrication; EZ-B audio stopped working before a weekend event.
robot
DJ's Teddy Ruxpin Robot Version 1
Animate a Teddy Ruxpin by replacing internals with servos and an EZ-B; control and script behaviors using Synthiam ARC.
12
12 k
Nomad 6R |
question
Diagmostic Report, Following Directions On How To Report Wi-Fi Question With Hp
Name: Wi-Fi Description: Qualcomm Atheros AR9485 802.11b/g/n...
3
2 k
DJ Sures |
robot
Vulcangodoffire2000's My Son And I Are Going To Rebu
Rebuild RAD robot integrating DIY kit, Nexus 5 phone and sensors for a senior capstone to showcase skills for an MIT application.
0
2 k
vulcangodoffir… |
question
Halloween Is Coming Soon
Hello To All, This time of year my old plc controllers and arduino ends up at my friends Halloween Barn. I program a number of displays for our friends, both fiends and...
38
7 k
Andy Roid |
question
Reset And Connect
with the new batt wil i need to reset connection or calibrate? roli jd six
4
3 k
Nomad 6R |
robot
Andy's The Great Madame Ninndo Project
Announcer using an older Scary Terry board
11
5 k
Andy Roid |
question
Camera Detection Script Help
Hey guys. A little help is needed with a script. I am helping a friend out setting up their v4 camera and doing some object recognition. What my friend want's is, if nothing is recognized after 10 seconds, a script or part of a script runs. Here's an example of what is needed... waitforchange($CameraObjectName,10000) sayezbwait("I have...
8
3 k
Steve G |
question
Help Using A Returned Position Value From Kangaroo In Ez-Script
I'm needing some help figuring out a way to use a returned position value from a Kangaroo X2 in a EZ-Script. What I want to do is take that value and use it in an "If"/"ElseIF" statement, do a couple "Less Than, Greater Than" comparisons and send the script to one of two sub sections. The problem I think I'm having is...
4
3 k
Dave Schulpius |
question
Batterie Safety
wel i had a bad week with batts.so i wanted to tell my experiants. the batts we use here has a sort seal ( stamp ) that warns you , for excample is bad or worn out.on one side is a sort off...
2
3 k
Nomad 6R |
robot
Stegall's I Own A Company And Work A Gre
Automate 3D printing with a robot that detects print completion, removes parts, and waits for the next job for fully autonomous overnight production.
0
2 k
stegall.matthe… |
question
Is This Warenty
i make another topic about the batteries cause this can be a case of warenty. the chargers says output 12 volt,i get 12.22 volt .i think thats ok the charger gifs 11.20 something to low.so i look at the batt in jd win8, and it wil not charge,green led goes out.i also see some punctering in the batt, from i gess factory.i made a video.the balancers...
43
7 k
Nomad 6R |
question
Stuck On Wii Remote Screen
I just installed ARC on my iPad to control my new Roli Rover and went to the Wii Remote screen with the virtual buttons (mostly a white background). There appears to be no way to go back to the ARC page and I'm stuck on this page...I can hit the bottom button on the iPad and get the normal iPad screen, but when I re-select the ARC icon, it goes...
2
2 k
Norton82 |